Beta

⌘K

T

Texas Instruments

Series	Category	# Parts	Status	Description

Part	Spec A	Spec B	Spec C	Spec D	Description

Standalone parts(19791)

...

Part	Package / Case	Ratio - S/H:ADC	Sampling Rate (Per Second)	Input Type	Architecture	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Number of Inputs	Data Interface	Number of Bits	Configuration	Supplier Device Package	Reference Type	Number of A/D Converters	Voltage - Supply, Analog [Max]	Voltage - Supply, Analog [Min]	Mounting Type	Type	Applications	Frequency	Dimming	Current - Output / Channel	Topology	Voltage - Supply (Max) [Max]	Voltage - Output	Voltage - Supply (Min) [Min]	Internal Switch(s)	Number of Outputs	Current - Supply (Max) [Max]	Voltage Dropout (Max) [Max]	Number of Regulators	Voltage - Output (Min/Fixed)	Output Type	Protection Features	Voltage - Input (Max) [Max]	Output Configuration	Control Features	Current - Quiescent (Iq)	Current - Output	PSRR	Output Type	Voltage - Output (Max) [Max]	Current - Input Bias	Slew Rate	Amplifier Type	Package / Case	Package / Case	Number of Circuits	-3db Bandwidth	Voltage - Supply Span (Min) [Min]	Voltage - Supply Span (Max) [Max]	Voltage - Input Offset	Current - Supply	Qualification	Grade	Package / Case [custom]	Package / Case [custom]	Gain Bandwidth Product	Current - Output (Max) [Max]	Size / Dimension [z]	Size / Dimension [y]	Size / Dimension [y]	Size / Dimension [z]	Size / Dimension [x]	Size / Dimension [x]	Efficiency	Power (Watts)	Features	Voltage - Output 1
Texas Instruments SN64BCT29828BNT
Texas Instruments ADS6128IRGZT	48-VFQFN Exposed Pad	1:1	210 M per second	Differential	Pipelined	85 °C	-40 °C	1.7 V	1.9 V	1	LVDS - Parallel Parallel	12 bits	S/H-ADC	48-VQFN (7x7)	External Internal	1	3.6 V	3 V	Surface Mount
Texas Instruments TMS320DRE311PGE
Texas Instruments TPS61040DRVTG4						85 °C	-40 °C							6-WSON (2x2)					Surface Mount	DC DC Regulator	Backlight	1 MHz	PWM	350 mA	Step-Up (Boost)	6 V	28 V	1.8 V		1
Texas Instruments LP3876ET-2.5	TO-220-5 Formed Leads					125 °C	-40 °C							TO-220-5					Through Hole												15 mA	1.2 V	1	2.5 V	1.81 mOhm	Over Current Over Temperature Short Circuit	7 V	Positive	Enable	5 mA	3 A
Texas Instruments LMS1585ACSX-ADJ	D2PAK (3 Leads + Tab) TO-263-4 TO-263AA					125 °C	0 °C							TO-263 (DDPAK-3)					Surface Mount												13 mA	1.4 V	1	1.25 V		Over Current Over Temperature	13 V	Positive		7 mA	5 A	72 dB	Adjustable	11.6 V
Texas Instruments INA111APG4	8-DIP					85 °C	-40 °C							8-PDIP					Through Hole					30 mA																					2 pA	17 V/µs	Instrumentation	0.3 in	7.62 mm	1	2 MHz	12 V	36 V	200 çV	3.3 mA
Texas Instruments LM2902BQPWRQ1	14-TSSOP					125 °C	-40 °C							14-TSSOP					Surface Mount					30 mA																			Push-Pull		10 nA		General Purpose			4		3 V	36 V	300 çV	350 µA	AEC-Q100	Automotive	0.173 "	4.4 mm	1.2 MHz
Texas Instruments OPA340NA/3KG4	SC-74A SOT-753					85 °C	-40 °C							SOT-23-5					Surface Mount					50 mA																			Rail-to-Rail		0.2 pA	6 V/çs	General Purpose			1		2.5 V	5.5 V	150 µV	750 µA					5.5 MHz
Texas Instruments PT5112A	3-SIP Module					85 °C	-40 °C												Through Hole Right Angle	Linear Regulator Replacement	ITE (Commercial)									1							38 V																								1 A	9.7 mm	1.02 "	25.9 mm	0.38 in	1 in	25.4 mm	91 %	8 W	OCP OTP	8 V

Series	Category	# Parts	Status	Description

Texas InstrumentsUCC3977	Integrated Circuits (ICs)	1	4
Texas InstrumentsUCC442734-A/4-A single-channel low-side gate driver with 5-V UVLO	Gate Drivers	1	1	The UCC44273 single-channel, high-speed, low-side gate driver device is capable of effectively driving MOSFET and IGBT power switches. Using a design that inherently minimizes shoot-through current, the UCC44273 is capable of sourcing and sinking high peak-current pulses into capacitive loads offering rail-to-rail drive capability and extremely small propagation delay typically... Read More
Texas InstrumentsUCC53045kVrms, 4A/6A single-channel isolated gate driver with 5V UVLO for GaNFETs & MOSFETs	Development Boards, Kits, Programmers	2	1	The UCC5304 device is an isolated single-channel gate driver with 4-A peak-source and 6-A peak-sink current. It is designed to drive power MOSFETs and GaNFETs in PFC, Isolated AC/DC, DC/DC, and synchronous rectification applications, with fast switching performance and robust ground bounce protection through greater than 100-V/ns common-mode transient immunity... Read More
Texas InstrumentsUCC53103kVrms/5kVrms, 2A/1A single-channel isolated gate driver with miller clamp, 12V UVLO & D or DWV pkg	Isolators - Gate Drivers	2	6	The UCC53x0 is a family of single-channel, isolated gate drivers designed to drive MOSFETs, IGBTs, SiC MOSFETs, and GaN FETs (UCC5350SBD). The UCC53x0S provides a split output that controls the rise and fall times individually. The UCC53x0M connects the gate of the transistor to an internal clamp to prevent false... Read More
Texas InstrumentsUCC5320	Isolators - Gate Drivers	6	1
Texas InstrumentsUCC5350-Q1Automotive ±5A single-channel isolated gate driver with Miller clamp or split outputs for SiC/IGBT	Isolators	5	1	The UCC5350-Q1 is a single-channel, isolated gate driver with 10A source and 10A sink typical peak current designed to drive MOSFETs, IGBTs, and SiC MOSFETs. The UCC5350-Q1 has the option for Miller clamp or Split Outputs. The CLAMP pin is used to connect the transistor gate to an internal FET... Read More
Texas InstrumentsUCC5390	Isolators	5	1
Texas InstrumentsUCC551	Integrated Circuits (ICs)	2	8
Texas InstrumentsUCC560	Integrated Circuits (ICs)	1	8
Texas InstrumentsUCC5606Lowest capacitance 9-line 3 to 5-V SE terminator for SCSI through Ultra SCSI with reverse disconnect	Interface	1	1	The UCC5606 provides 9 lines of active termination for a small computer systems interface (SCSI) parallel bus. The SCSI standard recommends active termination at both ends of the cable segment. The UCC5606 is ideal for high performance 3.3-V SCSI systems. The key features contributing to such low operating voltage are... Read More