O
ON Semiconductor
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Output Type | Input Type | Voltage - Load | Grade | Voltage - Supply (Vcc/Vdd) | Package / Case | Interface | Features | Number of Outputs | Rds On (Typ) | Ratio - Input:Output [custom] | Mounting Type | Fault Protection | Current - Output (Max) [Max] | Switch Type | Supplier Device Package [y] | Supplier Device Package [x] | Supplier Device Package | Operating Temperature [Max] | Operating Temperature [Min] | Qualification | Output Configuration | Number of Inputs | Package / Case [y] | Package / Case [x] | Current - Output High, Low | Max Propagation Delay @ V, Max CL | Input Logic Level - High [Min] | Input Logic Level - High [Max] | Voltage - Supply [Min] | Voltage - Supply [Max] | Input Logic Level - Low [Max] | Input Logic Level - Low [Min] | Number of Circuits | Logic Type | Power - Max [Max] | Test Condition | Td (on/off) @ 25°C | Voltage - Collector Emitter Breakdown (Max) | Gate Charge | Vce(on) (Max) @ Vge, Ic | Current - Collector (Ic) (Max) [Max] | Voltage - Output [Min] | Voltage - Output [Max] | Applications | Voltage - Input [Min] | Voltage - Input [Max] | Package / Case [custom] | Package / Case [custom] | Type | Data Rate | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Protocol | Number of Bits per Element | Number of Elements | Zero Crossing Circuit | Current - LED Trigger (Ift) (Max) [Max] | Number of Channels | Voltage - Off State | Current - Hold (Ih) | Static dV/dt (Min) [Min] | Turn On Time | Current - DC Forward (If) (Max) [Max] | Voltage - Forward (Vf) (Typ) | Package / Case | Package / Case | Current - On State (It (RMS)) (Max) | Approval Agency | Technology | Drain to Source Voltage (Vdss) | Input Capacitance (Ciss) (Max) @ Vds | Current - Continuous Drain (Id) @ 25°C | Vgs(th) (Max) @ Id | FET Feature | Rds On (Max) @ Id, Vgs | Configuration |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ON Semiconductor | N-Channel | Non-Inverting | 42 V | Automotive | 6-VDFN Exposed Pad | On/Off | Auto Restart | 1 | 165 mOhm | 1:1 | Surface Mount | Current Limiting (Fixed) Over Temperature Over Voltage | 2 A | General Purpose | 3.3 | 3 | 6-DFN | 150 °C | -40 °C | AEC-Q100 | Low Side | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ON Semiconductor | 14-DIP | Through Hole | 14-DIP | 85 °C | -40 °C | 2 | 7.62 mm | 0.3 " | 24 mA | 7.5 ns | 2.1 V | 3.85 V | 2 V | 6 V | 1.65 V | 0.9 V | 4 | OR Gate | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ON Semiconductor | Logic | Automotive | I2PAK TO-262-3 Long Leads TO-262AA | Through Hole | TO-262 (I2PAK) | 175 °C | -40 C | AEC-Q101 | 187 W | 5 V 300 V 1000 Ohm | -/5.4µs | 360 V | 20 nC | 1.4 V | 44 A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ON Semiconductor | 16-TSSOP Exposed Pad | 1 | Surface Mount | 16-TSSOP-EP | 125 °C | 0 °C | 1.1 V | 1.8 V | Controller DDR | 2.3 V | 3.6 V | 0.173 " | 4.4 mm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ON Semiconductor | 8-SOIC | Surface Mount | 8-SOIC | 85 °C | -40 °C | 3.9 mm | 0.154 in | 3 V | 3.6 V | Driver | 600 Mbps | 0 | 2 | LVDS | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ON Semiconductor | 28-LCC (J-Lead) | Surface Mount | 11.43 | 11.43 | 28-PLCC | 70 °C | 0 °C | 4.75 V | 5.25 V | Shift Register | 16 | 1 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ON Semiconductor | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ON Semiconductor | Triac | 6-DIP | Through Hole | 6-DIP | 100 °C | -55 °C | 1.3 mA | 1 | 800 V | 500 µA | 10 kV/µs | 60 µs | 30 mA | 1.28 V | 0.3 in | 7.62 mm | 300 mA | UL VDE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ON Semiconductor | Automotive | 8-PowerTDFN | Surface Mount | 8-DFN (5x6) Dual Flag (SO8FL-Dual) | 175 ░C | -55 °C | AEC-Q101 | 3.1 W | MOSFET (Metal Oxide) | 60 V | 668 pF | 6.4 A | 2.5 V | Logic Level Gate | 36 mOhm | 2 N-Channel (Dual) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ON Semiconductor |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
ON SemiconductorSGB15N | Single IGBTs | 1 | 1 | |
ON SemiconductorSGB8206 | Single | 1 | 1 | |
| Single IGBTs | 2 | 1 | ON Semiconductor's Insulated Gate Bipolar Transistor(IGBT) UF series provides low conduction and switching losses. UF series is designed for the applications such as motor control and general inverters where High Speed Switching is required. | |
ON SemiconductorSGH15 | IGBTs | 1 | 1 | |
| Single IGBTs | 2 | 8 | ON Semiconductor's RUFD series of Insulated Gate Bipolar Transistors (IGBTs) provide low conduction and switching losses as well as short circuit ruggedness. The RUFD series is designed for applications such as motor control, uninterrupted power supplies (UPS) and general inverters where short circuit ruggedness is a required feature. | |
| IGBTs | 1 | 8 | ON Semiconductor’s UF series IGBTs provide low conduction and switching losses. UF series is designed for the applications such as general inverter and PFC where high speed switching is required feature. | |
| Transistors | 1 | 8 | ON Semiconductor's UFD series of Insulated Gate Bipolar Transistors (IGBTs) provides low conduction and switching losses. The UFD series is designed for applications such as motor control and general inverters where high speed switching is a required feature. | |
| Discrete Semiconductor Products | 1 | 8 | ON Semiconductor’s RUFD series of Insulated Gate Bipolar Transistors(IGBTs) provide low conduction and switching losses as well as short circuit ruggedness. The RUFD series is designed for applications such as motor control, UPS and general inverters where short circuit ruggedness is a required feature. | |
ON SemiconductorSGL50N60 | IGBTs | 1 | 8 | |
ON SemiconductorSGL5N | IGBTs | 1 | 8 | |