Beta

⌘K

T

Texas Instruments

Series	Category	# Parts	Status	Description

Part	Spec A	Spec B	Spec C	Spec D	Description

Standalone parts(19791)

...

Part	Package / Case	Ratio - S/H:ADC	Sampling Rate (Per Second)	Input Type	Architecture	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Number of Inputs	Data Interface	Number of Bits	Configuration	Supplier Device Package	Reference Type	Number of A/D Converters	Voltage - Supply, Analog [Max]	Voltage - Supply, Analog [Min]	Mounting Type	Type	Applications	Frequency	Dimming	Current - Output / Channel	Topology	Voltage - Supply (Max) [Max]	Voltage - Output	Voltage - Supply (Min) [Min]	Internal Switch(s)	Number of Outputs	Current - Supply (Max) [Max]	Voltage Dropout (Max) [Max]	Number of Regulators	Voltage - Output (Min/Fixed)	Output Type	Protection Features	Voltage - Input (Max) [Max]	Output Configuration	Control Features	Current - Quiescent (Iq)	Current - Output	PSRR	Output Type	Voltage - Output (Max) [Max]	Current - Input Bias	Slew Rate	Amplifier Type	Package / Case	Package / Case	Number of Circuits	-3db Bandwidth	Voltage - Supply Span (Min) [Min]	Voltage - Supply Span (Max) [Max]	Voltage - Input Offset	Current - Supply	Qualification	Grade	Package / Case [custom]	Package / Case [custom]	Gain Bandwidth Product	Current - Output (Max) [Max]	Size / Dimension [z]	Size / Dimension [y]	Size / Dimension [y]	Size / Dimension [z]	Size / Dimension [x]	Size / Dimension [x]	Efficiency	Power (Watts)	Features	Voltage - Output 1
Texas Instruments SN64BCT29828BNT
Texas Instruments ADS6128IRGZT	48-VFQFN Exposed Pad	1:1	210 M per second	Differential	Pipelined	85 °C	-40 °C	1.7 V	1.9 V	1	LVDS - Parallel Parallel	12 bits	S/H-ADC	48-VQFN (7x7)	External Internal	1	3.6 V	3 V	Surface Mount
Texas Instruments TMS320DRE311PGE
Texas Instruments TPS61040DRVTG4						85 °C	-40 °C							6-WSON (2x2)					Surface Mount	DC DC Regulator	Backlight	1 MHz	PWM	350 mA	Step-Up (Boost)	6 V	28 V	1.8 V		1
Texas Instruments LP3876ET-2.5	TO-220-5 Formed Leads					125 °C	-40 °C							TO-220-5					Through Hole												15 mA	1.2 V	1	2.5 V	1.81 mOhm	Over Current Over Temperature Short Circuit	7 V	Positive	Enable	5 mA	3 A
Texas Instruments LMS1585ACSX-ADJ	D2PAK (3 Leads + Tab) TO-263-4 TO-263AA					125 °C	0 °C							TO-263 (DDPAK-3)					Surface Mount												13 mA	1.4 V	1	1.25 V		Over Current Over Temperature	13 V	Positive		7 mA	5 A	72 dB	Adjustable	11.6 V
Texas Instruments INA111APG4	8-DIP					85 °C	-40 °C							8-PDIP					Through Hole					30 mA																					2 pA	17 V/µs	Instrumentation	0.3 in	7.62 mm	1	2 MHz	12 V	36 V	200 çV	3.3 mA
Texas Instruments LM2902BQPWRQ1	14-TSSOP					125 °C	-40 °C							14-TSSOP					Surface Mount					30 mA																			Push-Pull		10 nA		General Purpose			4		3 V	36 V	300 çV	350 µA	AEC-Q100	Automotive	0.173 "	4.4 mm	1.2 MHz
Texas Instruments OPA340NA/3KG4	SC-74A SOT-753					85 °C	-40 °C							SOT-23-5					Surface Mount					50 mA																			Rail-to-Rail		0.2 pA	6 V/çs	General Purpose			1		2.5 V	5.5 V	150 µV	750 µA					5.5 MHz
Texas Instruments PT5112A	3-SIP Module					85 °C	-40 °C												Through Hole Right Angle	Linear Regulator Replacement	ITE (Commercial)									1							38 V																								1 A	9.7 mm	1.02 "	25.9 mm	0.38 in	1 in	25.4 mm	91 %	8 W	OCP OTP	8 V

Series	Category	# Parts	Status	Description

Texas InstrumentsUCD7230A15.5 V, 2 MHz, 4 A synchronous buck MOSFET™ driver compatible with UCD92xx and improved power on	DC DC Switching Controllers	7	4	The UCD7230A is one in the UCD7k family of digital control compatible drivers for applications utilizing digital control techniques or applications requiring fast local peak current limit protection. The UCD7230A is a MOSFET gate driver specifically designed for synchronous buck applications. It is ideally suited to provide the bridge between... Read More
Texas InstrumentsUCD7231Digital Control Compatible Synchronous Buck Gate Driver with Current Sense and Fault Protection	DC DC Switching Controllers	2	1	The UCD7231 high current driver is specifically designed for digitally-controlled, point-of-load, synchronous buck switching power supplies. Two driver circuits provide high charge and discharge current for the high-side NMOS switch and the low-side NMOS synchronous rectifier in a synchronous buck circuit. The MOSFET gates are driven to +6 V by... Read More
Texas InstrumentsUCD7232Digital Control Compatible Synchronous-Buck Gate Driver with Current Sense and Fault Protection	Power Management (PMIC)	2	1	The UCD7232 high current driver is specifically designed for digitally-controlled, point-of-load, synchronous buck switching power supplies. Two driver circuits provide high charge and discharge current for the high-side NMOS switch and the low-side NMOS synchronous rectifier in a synchronous buck circuit. The MOSFET gates are driven by an internally regulated... Read More
Texas InstrumentsUCD7242Digital Dual Synchronous Buck Power Driver	Voltage Regulators - DC DC Switching Regulators	1	1	The UCD7242 is a complete power system ready to drive two independent buck power supplies. High side MOSFETs, low side MOSFETs, drivers, current sensing circuitry and necessary protection functions are all integrated into one monolithic solution to facilitate minimum size and maximum efficiency. Driver circuits provide high charge and discharge... Read More
Texas InstrumentsUCD74106Digital Synchronous Buck Power Driver	Power Management (PMIC)	2	1	The UCD74106 is a complete power system ready to drive a buck power supply (). High-side MOSFETs, low-side MOSFETs, drivers, current sensing circuitry and necessary protection functions are all integrated into one monolithic solution to facilitate minimum size and maximum efficiency. Driver circuits provide high charge and discharge current for... Read More
Texas InstrumentsUCD7411114 V, 15 A synchronous buck power stage with output current monitoring	Power Management (PMIC)	1	1	UCD74111 is a multi-chip module integrating a driver device and two NexFET power MOSFETs into a thermally enhanced compact, 5 mm × 7 mm, QFN package. A 15-A output current capability makes the device suitable for powering DSP and ASIC. The device is designed to complement digital or analog PWM... Read More
Texas InstrumentsUCD7412014 V, 25 A synchronous buck power stage with output current monitoring	Power Management (PMIC)	2	1	UCD74120 is a multi-chip module integrating a driver device and two NexFET power MOSFETs into a thermally enhanced compact, 5 mm × 7 mm, QFN package. A 25-A output current capability makes the device suitable for powering DSP and ASIC. The device is designed to complement digital or analog PWM... Read More
Texas InstrumentsUCD8220-Q1Automotive 4.5V to 15.5V digitally Assisted push-pull PWM controller	Power Management (PMIC)	2	1	The UCD8220-Q1 analog pulse-width modulator (PWM) device is used in digitally managed power supplies using a microcontroller or the TMS320 DSP family. The UCD8220-Q1 device is a double-ended PWM controller configured with push-pull drive logic. Systems using the UCD8220-Q1 device close the PWM feedback loop with traditional analog methods, but... Read More
Texas InstrumentsUCD90	Development Boards, Kits, Programmers	4	1
Texas InstrumentsUCD90120A12-Rail Power Supply Sequencer and Monitor with ACPI Support	Integrated Circuits (ICs)	4	1	The UCD90120A is a 12-rail PMBus/I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 12 power-supply voltage inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer... Read More