UCD74111 Series

14 V, 15 A synchronous buck power stage with output current monitoring

Catalog

14 V, 15 A synchronous buck power stage with output current monitoring

Part	Mounting Type	Package / Case	Supplier Device Package	Operating Temperature [Min]	Operating Temperature [Max]	Voltage - Input (Max) [Max]	Voltage - Input (Min) [Min]	Synchronous Rectifier	Function	Current - Output	Number of Outputs	Output Configuration	Frequency - Switching [Max]	Topology
Texas Instruments UCD74111RVFR	Surface Mount	40-PowerLFQFN	40-LQFN-CLIP (7x5)	-40 °C	125 ¯C	14 V	4.7 V		Step-Down	15 A	1	Positive	2 MHz	Buck

Catalog

14 V, 15 A synchronous buck power stage with output current monitoring

Key Features

• Integrates Synchronous Buck Driver and NexFET Power MOSFET Technology for High Power Density and High Efficiency15-A Output Current Capability for DSP and ASIC4.7-V to 14-V Input Voltage RangeOperational Switching Frequency Up to 2 MHzBuilt-In High-Side Current ProtectionDCR Current Sensing for Overcurrent Protection and Output Current MonitoringVoltage Proportional to Load Current Monitor OutputTri-State PWM Input for Power Stage ShutdownUVLO Housekeeping CircuitIntegrated Thermal Shutdown40-Pin, 5 mm x 7 mm, PQFN PowerStack PackageIntegrates Synchronous Buck Driver and NexFET Power MOSFET Technology for High Power Density and High Efficiency15-A Output Current Capability for DSP and ASIC4.7-V to 14-V Input Voltage RangeOperational Switching Frequency Up to 2 MHzBuilt-In High-Side Current ProtectionDCR Current Sensing for Overcurrent Protection and Output Current MonitoringVoltage Proportional to Load Current Monitor OutputTri-State PWM Input for Power Stage ShutdownUVLO Housekeeping CircuitIntegrated Thermal Shutdown40-Pin, 5 mm x 7 mm, PQFN PowerStack Package

Description

UCD74111 is a multi-chip module integrating a driver device and two NexFET power MOSFETs into a thermally enhanced compact, 5 mm × 7 mm, QFN package. A 15-A output current capability makes the device suitable for powering DSP and ASIC. The device is designed to complement digital or analog PWM controllers. The PWM input of the driver device is 3-state compatible. Two driver circuits provide high charge and discharge current for the high-side N-channel FET switch and the low-side N-channel FET synchronous rectifier in a synchronous buck converter. A precision current sensing amplifier that processes the voltage present across an external current sense element measures and monitors the output current. The PWM controller on the IMON pin can use this amplified signal. On-board comparators monitor the voltage across the high-side switch and the voltage across the external current sense element to safeguard the power stage from sudden high-current loads. A single resistor for the high-side comparator sets the blanking delay. This delay guards against false reports coincident with switching edge noise. In the event of a high-side fault or an overcurrent fault, the high-side FET turns OFF and the fault flag (FLT) asserts to alert the PWM controller. UCD74111 is a multi-chip module integrating a driver device and two NexFET power MOSFETs into a thermally enhanced compact, 5 mm × 7 mm, QFN package. A 15-A output current capability makes the device suitable for powering DSP and ASIC. The device is designed to complement digital or analog PWM controllers. The PWM input of the driver device is 3-state compatible. Two driver circuits provide high charge and discharge current for the high-side N-channel FET switch and the low-side N-channel FET synchronous rectifier in a synchronous buck converter. A precision current sensing amplifier that processes the voltage present across an external current sense element measures and monitors the output current. The PWM controller on the IMON pin can use this amplified signal. On-board comparators monitor the voltage across the high-side switch and the voltage across the external current sense element to safeguard the power stage from sudden high-current loads. A single resistor for the high-side comparator sets the blanking delay. This delay guards against false reports coincident with switching edge noise. In the event of a high-side fault or an overcurrent fault, the high-side FET turns OFF and the fault flag (FLT) asserts to alert the PWM controller.