Beta

⌘K

T

Texas Instruments

Series	Category	# Parts	Status	Description

Part	Spec A	Spec B	Spec C	Spec D	Description

Standalone parts(19791)

...

Part	Package / Case	Ratio - S/H:ADC	Sampling Rate (Per Second)	Input Type	Architecture	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Number of Inputs	Data Interface	Number of Bits	Configuration	Supplier Device Package	Reference Type	Number of A/D Converters	Voltage - Supply, Analog [Max]	Voltage - Supply, Analog [Min]	Mounting Type	Type	Applications	Frequency	Dimming	Current - Output / Channel	Topology	Voltage - Supply (Max) [Max]	Voltage - Output	Voltage - Supply (Min) [Min]	Internal Switch(s)	Number of Outputs	Current - Supply (Max) [Max]	Voltage Dropout (Max) [Max]	Number of Regulators	Voltage - Output (Min/Fixed)	Output Type	Protection Features	Voltage - Input (Max) [Max]	Output Configuration	Control Features	Current - Quiescent (Iq)	Current - Output	PSRR	Output Type	Voltage - Output (Max) [Max]	Current - Input Bias	Slew Rate	Amplifier Type	Package / Case	Package / Case	Number of Circuits	-3db Bandwidth	Voltage - Supply Span (Min) [Min]	Voltage - Supply Span (Max) [Max]	Voltage - Input Offset	Current - Supply	Qualification	Grade	Package / Case [custom]	Package / Case [custom]	Gain Bandwidth Product	Current - Output (Max) [Max]	Size / Dimension [z]	Size / Dimension [y]	Size / Dimension [y]	Size / Dimension [z]	Size / Dimension [x]	Size / Dimension [x]	Efficiency	Power (Watts)	Features	Voltage - Output 1
Texas Instruments SN64BCT29828BNT
Texas Instruments ADS6128IRGZT	48-VFQFN Exposed Pad	1:1	210 M per second	Differential	Pipelined	85 °C	-40 °C	1.7 V	1.9 V	1	LVDS - Parallel Parallel	12 bits	S/H-ADC	48-VQFN (7x7)	External Internal	1	3.6 V	3 V	Surface Mount
Texas Instruments TMS320DRE311PGE
Texas Instruments TPS61040DRVTG4						85 °C	-40 °C							6-WSON (2x2)					Surface Mount	DC DC Regulator	Backlight	1 MHz	PWM	350 mA	Step-Up (Boost)	6 V	28 V	1.8 V		1
Texas Instruments LP3876ET-2.5	TO-220-5 Formed Leads					125 °C	-40 °C							TO-220-5					Through Hole												15 mA	1.2 V	1	2.5 V	1.81 mOhm	Over Current Over Temperature Short Circuit	7 V	Positive	Enable	5 mA	3 A
Texas Instruments LMS1585ACSX-ADJ	D2PAK (3 Leads + Tab) TO-263-4 TO-263AA					125 °C	0 °C							TO-263 (DDPAK-3)					Surface Mount												13 mA	1.4 V	1	1.25 V		Over Current Over Temperature	13 V	Positive		7 mA	5 A	72 dB	Adjustable	11.6 V
Texas Instruments INA111APG4	8-DIP					85 °C	-40 °C							8-PDIP					Through Hole					30 mA																					2 pA	17 V/µs	Instrumentation	0.3 in	7.62 mm	1	2 MHz	12 V	36 V	200 çV	3.3 mA
Texas Instruments LM2902BQPWRQ1	14-TSSOP					125 °C	-40 °C							14-TSSOP					Surface Mount					30 mA																			Push-Pull		10 nA		General Purpose			4		3 V	36 V	300 çV	350 µA	AEC-Q100	Automotive	0.173 "	4.4 mm	1.2 MHz
Texas Instruments OPA340NA/3KG4	SC-74A SOT-753					85 °C	-40 °C							SOT-23-5					Surface Mount					50 mA																			Rail-to-Rail		0.2 pA	6 V/çs	General Purpose			1		2.5 V	5.5 V	150 µV	750 µA					5.5 MHz
Texas Instruments PT5112A	3-SIP Module					85 °C	-40 °C												Through Hole Right Angle	Linear Regulator Replacement	ITE (Commercial)									1							38 V																								1 A	9.7 mm	1.02 "	25.9 mm	0.38 in	1 in	25.4 mm	91 %	8 W	OCP OTP	8 V

Series	Category	# Parts	Status	Description

Texas InstrumentsUCC21520-Q1Automotive 4-A, 6-A, 5.7-kVRMS isolated dual-channel gate driver with dual input, disable, deadtime	Evaluation and Demonstration Boards and Kits	7	1	The UCC21520 is an isolated dual-channel gate driver with 4A source and 6A sink peak current. It is designed to drive power MOSFETs, IGBTs, and SiC MOSFETs up to 5MHz. The input side is isolated from the two output drivers by a 5.7kVRMS reinforced isolation barrier, with a minimum of... Read More
Texas InstrumentsUCC215215.7kVrms, 4A/6A dual-channel isolated gate driver with dual input, enable, 8V UVLO & LGA pack	Development Boards, Kits, Programmers	4	1	The UCC21521 is an isolated dual-channel gate driver with 4-A source and 6-A sink peak current. It is designed to drive power MOSFETs, IGBTs, and SiC MOSFETs up to 5-MHz with best-in-class propagation delay and pulse-width distortion. The input side is isolated from the two output drivers by a 5.7-kVRMSreinforced... Read More
Texas InstrumentsUCC21530-Q1Automotive, 4A, 6A, 5.7kVRMS, isolated dual-channel gate driver with EN and DT pins for IGBT/SiC	Isolators - Gate Drivers	5	1	The UCC21530-Q1 is an isolated dual-channel gate driver with 4A source and 6A sink peak current. It is designed to drive IGBTs, Si MOSFETs, and SiC MOSFETs up to 5MHz. The input side is isolated from the two output drivers by a 5.7kVRMS reinforced isolation barrier, with a minimum of... Read More
Texas InstrumentsUCC21540A-Q15.7kVrms 4A/6A dual-channel isolated gate driver with dual inputs, DT pin & 8V UVLO in DW or DWK pkg	Evaluation Boards	9	1	The UCC21540-Q1 device is an isolated dual channel gate driver with programmable dead time and wide temperature range. This device exhibits consistent performance and robustness under extreme temperature conditions. It is designed with 4 A peak-source and 6 A peak-sink current to drive power MOSFET, IGBT, and GaN transistors. The... Read More
Texas InstrumentsUCC215415.7kVrms 1.5A/2.5A dual-channel isolated gate driver with 8V UVLO, dual input, disable pin in DW pkg	Isolators	2	1	The UCC2154x is an isolated dual channel gate driver family designed with up to 4 A/6 A peak source/sink current to drive power MOSFET, IGBT, and GaN transistors. UCC2154x in DWK package also offers 3.3-mm minimum channel-to-channel spacing, which facilitates higher bus voltage. The UCC2154x family can be configured as... Read More
Texas InstrumentsUCC215425.7kVrms,4A/6A dual-channel isolated gate driver w/ 8V UVLO, 3.3mm channel to channel spacing option	Isolators - Gate Drivers	3	1	The UCC2154x is an isolated dual channel gate driver family designed with up to 4 A/6 A peak source/sink current to drive power MOSFET, IGBT, and GaN transistors. UCC2154x in DWK package also offers 3.3-mm minimum channel-to-channel spacing, which facilitates higher bus voltage. The UCC2154x family can be configured as... Read More
Texas InstrumentsUCC215504A/6A, 5-kVRMS dual-channel isolated gate driver with DIS and DT pins for IGBT	Isolators - Gate Drivers	2	1	The UCC21550 is an isolated dual channel gate driver family with programmable dead time and wide temperature range. It is designed with 4A peak-source and 6A peak-sink current to drive power MOSFET, SiC, GaN, and IGBT transistors. The UCC21550 can be configured as two low-side drivers, two high-side drivers, or... Read More
Texas InstrumentsUCC21550-Q1Automotive, 4A/6A, 5-kVRMS dual-channel isolated gate driver with DIS and DT pins for IGBT	Isolators	2	1	The UCC21550-Q1 is an isolated dual channel gate driver family with programmable dead time and wide temperature range. It is designed with 4A peak-source and 6A peak-sink current to drive power MOSFET, SiC, GaN, and IGBT transistors. The UCC21550-Q1 can be configured as two low-side drivers, two high-side drivers, or... Read More
Texas InstrumentsUCC21551	Isolators - Gate Drivers	2	1
Texas InstrumentsUCC21551-Q1Automotive, 4A/6A 5kVRMS dual-channel isolated gate driver with EN and DT pins for IGBT and SiC	Isolators - Gate Drivers	2	1	The UCC21551x-Q1 is an isolated dual channel gate driver family with programmable dead time and wide temperature range. It is designed with 4A peak-source and 6A peak-sink current to drive power MOSFET, SiC, and IGBT transistors. The UCC21551x-Q1 can be configured as two low-side drivers, two high-side drivers, or a... Read More