Beta

⌘K

A

Analog Devices

Series	Category	# Parts	Status	Description

Part	Spec A	Spec B	Spec C	Spec D	Description

Standalone parts(7780)

...

Part	Reset Timeout [Min]	Reset	Supplier Device Package	Voltage - Threshold	Operating Temperature [Min]	Operating Temperature [Max]	Number of Voltages Monitored	Package / Case	Output	Type	Mounting Type	Current - Supply	Voltage - Supply	RF Type	Frequency [Min]	Frequency [Max]	Test Frequency	Output Configuration	Synchronous Rectifier	Frequency - Switching	Package / Case	Package / Case	Voltage - Output (Max) [Max]	Output Type	Number of Outputs	Voltage - Output (Min/Fixed)	Voltage - Input (Max) [Max]	Voltage - Input (Min) [Min]	Function	Number of D/A Converters	Settling Time	Differential Output	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Voltage - Supply, Analog [Min]	Voltage - Supply, Analog [Max]	Reference Type	Number of Bits	INL/DNL (LSB)	Data Interface	Ratio - S/H:ADC	Number of A/D Converters	Architecture	Input Type	Package / Case	Configuration	Number of Inputs	Sampling Rate (Per Second)	Voltage - Supply [Min]	Voltage - Supply [Max]	Interface	Topology	Protection Features	Current - Supply (Max) [Max]	Current - Quiescent (Iq)	PSRR [Max]	PSRR [Min]	Current - Output	Number of Regulators	Voltage Dropout (Max) [Max]	Control Features	Number of Bits [custom]
Analog Devices ADM6713RAKSZ-REEL	140 ms	Active Low	SC-70-4	2.63 V	-40 °C	125 °C	1	SC-82A SOT-343	Open Drain or Open Collector	Simple Reset/Power-On Reset	Surface Mount
Analog Devices HMC913-SX			Die					Die			Surface Mount	80 mA	3.3 V	General Purpose	600 MHz	20 GHz	600 MHz
Analog Devices LTC1550LCGN#PBF			16-SSOP		0 °C	70 °C		16-SSOP			Surface Mount							Negative		900 kHz	0.154 in	3.9 mm	-4.8 V	Adjustable	1	-1.225 V	5.5 V	2.7 V	Step-Up/Step-Down
Analog Devices LTC2664CUH-16#TRPBF			32-QFN (5x5)		0 °C	70 °C					Surface Mount													Voltage - Buffered						4	20 µs		1.71 V	5.5 V	-4.5 V	15.75 V	External Internal	16	0.35 LSB 2.2 LSB	SPI
Analog Devices LTC2356CMSE-14#TRPBF			10-MSOP-EP		0 °C	70 °C		10-MSOP 10-TFSOP Exposed Pad			Surface Mount																						3.1 V	3.6 V	3.1 V	3.6 V	External Internal	14		SPI	1:1	1	SAR	Differential Single Ended	0.118 in 3 Lead	S/H-ADC	1	3.5 M
Analog Devices LTC6820IMS#TRPBF			16-MSOP					16-TFSOP			Surface Mount																																						2.7 V	5.5 V	SPI
Analog Devices LT1959CR#PBF			DDPAK-7		0 °C	125 ¯C		D2PAK (7 Leads + Tab) TO-263-8 TO-263CA			Surface Mount							Positive		500 kHz			12.9 V	Adjustable	1	1.21 V	15 V	4.3 V	Step-Down																							Buck SEPIC
Analog Devices ADP171AUJZ-R7					-40 °C	125 °C		SOT-23-5 Thin TSOT-23-5			Surface Mount							Positive					3 V	Adjustable		0.8 V	3.6 V																										Over Current Over Temperature Under Voltage Lockout (UVLO)	260 µA	60 µA	73 dB	47 dB	300 mA	1	0.135 V	Enable
Analog Devices AD767KN			24-PDIP		0 °C	70 °C		24-DIP			Through Hole										0.3 in	7.62 mm		Voltage - Buffered							3 µs				-11.4 V	16.5 V	External Internal	12 bits		Parallel			Current Steering
Analog Devices LTC2634CUD-LMX10#TRPBF			16-QFN (3x3)		0 °C	70 °C		16-WFQFN Exposed Pad			Surface Mount													Voltage - Buffered						4	3.8 µs		2.7 V	5.5 V	2.7 V	5.5 V	External Internal		0.2 LSB 0.5 LSB	SPI																						10

Series	Category	# Parts	Status	Description

Analog DevicesLTC4059LTC4059A900mA Linear Li-Ion Battery Chargers with Thermal Regulation in 2 × 2 DFN	Battery Chargers	1	1	The LTC4059/LTC4059A are constant-current/constant-voltage linear chargers for single cell lithium-ion batteries. Their 2mm × 2mm DFN package and low external component count make these chargers especially well suited for portable applications. Furthermore, they are designed to work within USB power specifications.No external sense resistor, MOSFET or blocking diode is required.... Read More
Analog DevicesLTC4060Standalone Linear NiMH/NiCd Fast Battery Charger	Power Management (PMIC)	4	1	The LTC4060 is a complete fast charging system for NiMH or NiCd batteries. Just a few external components are needed to design a standalone linear charging system.An external PNP transistor provides charge current that is user programmable with a resistor. A small external capacitor sets the maximum charge time. No... Read More
Analog DevicesLTC4062Standalone Linear Li-Ion Battery Charger with Micropower Comparator	PMIC	1	1	The LTC4062 is a full-featured, flexible, standalone linear charger for single-cell Lithium-Ion batteries. It is capable of operating within USB power specifications.Both programmable time and programmable current based termination schemes are available. Furthermore, theCHRGopen-drain status pin can be programmed to indicate the battery charge state according to the needs of... Read More
Analog DevicesLTC4063Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear Regulator	Integrated Circuits (ICs)	1	1	The LTC4063 is a standalone linear charger for single cell lithium-ion batteries with an adjustable low dropout linear regulator (LDO). The adjustable LDO regulates an output voltage between 1.2V to 4.2V at up to 100mA load current. When the input supply (wall adapter or USB supply) is removed, the LDO... Read More
Analog DevicesLTC4064Monolithic Linear Charger for Back-Up Li-Ion Batteries	Battery Chargers	2	1	The LTC4064 is a standalone linear charger optimized for prolonging the life of 1-cell Li-ion batteries in battery backup applications. By charging to a float voltage of 4V instead of 4.2V or 4.1V, the LTC4064 decelerates the aging process and capacity degradation when the battery is unused for long periods... Read More
Analog DevicesLTC4065-4.4Standalone 750mA Li-Ion Battery Charger in 2 × 2 DFN	Battery Chargers	1	1	The LTC4065-4.4 is a complete constant-current/constant-voltage linear charger for high capacity single-cell lithium-ion batteries with a 4.4V float voltage. Its 2mm × 2mm DFN package and low external component count make the LTC4065-4.4 especially well-suited for portable applications. Furthermore, LTC4065-4.4 is specifically designed to work within USB power specifications.TheCHRGpin indicates... Read More
Analog DevicesLTC4065LLTC4065LXLTC4065L-4.1LTC4065LX-4.1Standalone 250mA Li-Ion Battery Charger in 2 × 2 DFN	Power Management (PMIC)	6	1	The LTC4065L is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion batteries. Its small size and ability to accurately regulate low charge currents make the LTC4065L especially well-suited for portable applications using low capacity rechargeable lithium-ion cells. Furthermore, LTC4065L is specifically designed to work within USB power specifications.TheCHRGpin indicates when... Read More
Analog DevicesLTC4066	Power Management (PMIC)	6	1
Analog DevicesLTC4068-4.2Standalone Linear Li-Ion Battery Charger with Programmable Termination	PMIC	2	1	The LTC4068 is a complete constant-current/constantvoltage linear charger for single cell lithium-ion batteries. Its DFN package and low external component count make the LTC4068 ideally suited for portable applications. Furthermore, the LTC4068 is designed to work within USB power specifications.No external sense resistor or external blocking diode are required due... Read More
Analog DevicesLTC4069-4.4Standalone 750mA Li-Ion Battery Charger in 2 x 2 DFN with NTC Thermistor Input	PMIC	2	1	The LTC4069-4.4 is a complete constant-current/constant-voltage linear charger for high capacity single-cell lithium-ion batteries with a 4.4V float voltage. The 2mm × 2mm DFN package and low external component count make the LTC4069-4.4 especially well-suited for portable applications. Furthermore, LTC4069-4.4 is specifically designed to work within USB power specifications.TheCHRGpin indicates... Read More