A
Analog Devices
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Reset Timeout [Min] | Reset | Supplier Device Package | Voltage - Threshold | Operating Temperature [Min] | Operating Temperature [Max] | Number of Voltages Monitored | Package / Case | Output | Type | Mounting Type | Current - Supply | Voltage - Supply | RF Type | Frequency [Min] | Frequency [Max] | Test Frequency | Output Configuration | Synchronous Rectifier | Frequency - Switching | Package / Case | Package / Case | Voltage - Output (Max) [Max] | Output Type | Number of Outputs | Voltage - Output (Min/Fixed) | Voltage - Input (Max) [Max] | Voltage - Input (Min) [Min] | Function | Number of D/A Converters | Settling Time | Differential Output | Voltage - Supply, Digital [Min] | Voltage - Supply, Digital [Max] | Voltage - Supply, Analog [Min] | Voltage - Supply, Analog [Max] | Reference Type | Number of Bits | INL/DNL (LSB) | Data Interface | Ratio - S/H:ADC | Number of A/D Converters | Architecture | Input Type | Package / Case | Configuration | Number of Inputs | Sampling Rate (Per Second) | Voltage - Supply [Min] | Voltage - Supply [Max] | Interface | Topology | Protection Features | Current - Supply (Max) [Max] | Current - Quiescent (Iq) | PSRR [Max] | PSRR [Min] | Current - Output | Number of Regulators | Voltage Dropout (Max) [Max] | Control Features | Number of Bits [custom] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices | 140 ms | Active Low | SC-70-4 | 2.63 V | -40 °C | 125 °C | 1 | SC-82A SOT-343 | Open Drain or Open Collector | Simple Reset/Power-On Reset | Surface Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | Die | Die | Surface Mount | 80 mA | 3.3 V | General Purpose | 600 MHz | 20 GHz | 600 MHz | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-SSOP | 0 °C | 70 °C | 16-SSOP | Surface Mount | Negative | 900 kHz | 0.154 in | 3.9 mm | -4.8 V | Adjustable | 1 | -1.225 V | 5.5 V | 2.7 V | Step-Up/Step-Down | ||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 32-QFN (5x5) | 0 °C | 70 °C | Surface Mount | Voltage - Buffered | 4 | 20 µs | 1.71 V | 5.5 V | -4.5 V | 15.75 V | External Internal | 16 | 0.35 LSB 2.2 LSB | SPI | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 10-MSOP-EP | 0 °C | 70 °C | 10-MSOP 10-TFSOP Exposed Pad | Surface Mount | 3.1 V | 3.6 V | 3.1 V | 3.6 V | External Internal | 14 | SPI | 1:1 | 1 | SAR | Differential Single Ended | 0.118 in 3 Lead | S/H-ADC | 1 | 3.5 M | ||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-MSOP | 16-TFSOP | Surface Mount | 2.7 V | 5.5 V | SPI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | DDPAK-7 | 0 °C | 125 ¯C | D2PAK (7 Leads + Tab) TO-263-8 TO-263CA | Surface Mount | Positive | 500 kHz | 12.9 V | Adjustable | 1 | 1.21 V | 15 V | 4.3 V | Step-Down | Buck SEPIC | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | -40 °C | 125 °C | SOT-23-5 Thin TSOT-23-5 | Surface Mount | Positive | 3 V | Adjustable | 0.8 V | 3.6 V | Over Current Over Temperature Under Voltage Lockout (UVLO) | 260 µA | 60 µA | 73 dB | 47 dB | 300 mA | 1 | 0.135 V | Enable | ||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 24-PDIP | 0 °C | 70 °C | 24-DIP | Through Hole | 0.3 in | 7.62 mm | Voltage - Buffered | 3 µs | -11.4 V | 16.5 V | External Internal | 12 bits | Parallel | Current Steering | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-QFN (3x3) | 0 °C | 70 °C | 16-WFQFN Exposed Pad | Surface Mount | Voltage - Buffered | 4 | 3.8 µs | 2.7 V | 5.5 V | 2.7 V | 5.5 V | External Internal | 0.2 LSB 0.5 LSB | SPI | 10 |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Integrated Circuits (ICs) | 1 | 1 | The LTC4001-1 is a 2A Li-Ion battery charger intended for 5V wall adapters. It utilizes a 1.5MHz synchronous buck converter topology to reduce power dissipation during charging. Low power dissipation, an internal MOSFET and sense resistor allow a physically small charger that can be embedded in a wide range of... Read More | |
| PMIC | 5 | 1 | The LTC4002 is a complete battery charger controller for one (4.2V) or two (8.4V) cell lithium-ion batteries. With a 500kHz switching frequency, the LTC4002 provides a small, simple and efficient solution to fast charge Li-Ion batteries from a wide range of supply voltages. An external sense resistor sets the charge... Read More | |
| Power Management (PMIC) | 1 | 1 | The LTC4006 is a complete constant-current/constant voltage charger controller for 2-, 3- or 4-cell lithium batteries in a small package using few external components. The PWM controller is a synchronous, quasi-constant frequency, constant off-time architecture that will not generate audible noise even when using ceramic capacitors.The LTC4006 is available in... Read More | |
| Power Management (PMIC) | 2 | 1 | The LTC4007-1 is a constant-current/constant-voltage charger controller for 3- or 4-cell lithium-ion batteries. The PWM controller uses a synchronous, quasi-constant frequency, constant off-time architecture that will not generate audible noise even when using ceramic capacitors. Charging current is programmable to ±4% accuracy using a programming resistor. Charging current can also... Read More | |
| Battery Chargers | 2 | 1 | The LTC4008 is a constant-current/constant-voltage charger controller. The PWM controller uses a synchronous, quasi-constant frequency, constant off-time architecture that will not generate audible noise even when using ceramic capacitors. Charging current is programmable with a sense resistor and programming resistor to ±4% typical accuracy. Charging current can be monitored as... Read More | |
| Integrated Circuits (ICs) | 1 | 1 | The LTC4009 is a constant-current/constant-voltage battery charger controller. It uses a synchronous quasiconstant frequency PWM control architecture that will not generate audible noise with ceramic bulk capacitors. Charge current is set by the combination of external sense, input and programming resistors. With no built-in termination, the LTC4009 family charges a... Read More | |
| PMIC | 1 | 1 | The LTC4011 provides a complete, cost-effective nickel battery fast charge solution in a small package using few external components. A 550kHz PWM current source controller and all necessary charge initiation, monitoring and termination control circuitry are included.The LTC4011 automatically senses the presence of a DC adapter and battery insertion or... Read More | |
| Power Management (PMIC) | 6 | 1 | The LTC4012 is a constant-current /constant-voltage battery charger controller. It uses a synchronous quasi-constant frequency PWM control architecture that will not generate audible noise with ceramic bulk capacitors. Charge current is set by external resistors and can be monitored as an output voltage. With no built-in termination, the LTC4012 family... Read More | |
| PMIC | 2 | 1 | The LTC4013 is a high voltage battery charger that is well suited for charging a wide range of lead-acid batteries including both vented and sealed types. It supports bulk, float, absorption and equalization charging. The LTC4013 also supports termination options for Li-Ion/Polymer and LiFePO4batteries.Charging is performed with a high efficiency... Read More | |
| Power Management (PMIC) | 3 | 1 | The LTC4015 is a complete synchronous buck controller/charger with pin-selectable, chemistry specific charging and termination algorithms.The LTC4015 can charge Li-Ion/Polymer, LiFePO4, or lead-acid batteries. Battery charge voltage is pin selectable and I2C adjustable. Input current limit and charge current can be accurately programmed with sense resistors and can be individually... Read More | |