Beta

⌘K

A

Analog Devices

Series	Category	# Parts	Status	Description

Part	Spec A	Spec B	Spec C	Spec D	Description

Standalone parts(7780)

...

Part	Reset Timeout [Min]	Reset	Supplier Device Package	Voltage - Threshold	Operating Temperature [Min]	Operating Temperature [Max]	Number of Voltages Monitored	Package / Case	Output	Type	Mounting Type	Current - Supply	Voltage - Supply	RF Type	Frequency [Min]	Frequency [Max]	Test Frequency	Output Configuration	Synchronous Rectifier	Frequency - Switching	Package / Case	Package / Case	Voltage - Output (Max) [Max]	Output Type	Number of Outputs	Voltage - Output (Min/Fixed)	Voltage - Input (Max) [Max]	Voltage - Input (Min) [Min]	Function	Number of D/A Converters	Settling Time	Differential Output	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Voltage - Supply, Analog [Min]	Voltage - Supply, Analog [Max]	Reference Type	Number of Bits	INL/DNL (LSB)	Data Interface	Ratio - S/H:ADC	Number of A/D Converters	Architecture	Input Type	Package / Case	Configuration	Number of Inputs	Sampling Rate (Per Second)	Voltage - Supply [Min]	Voltage - Supply [Max]	Interface	Topology	Protection Features	Current - Supply (Max) [Max]	Current - Quiescent (Iq)	PSRR [Max]	PSRR [Min]	Current - Output	Number of Regulators	Voltage Dropout (Max) [Max]	Control Features	Number of Bits [custom]
Analog Devices ADM6713RAKSZ-REEL	140 ms	Active Low	SC-70-4	2.63 V	-40 °C	125 °C	1	SC-82A SOT-343	Open Drain or Open Collector	Simple Reset/Power-On Reset	Surface Mount
Analog Devices HMC913-SX			Die					Die			Surface Mount	80 mA	3.3 V	General Purpose	600 MHz	20 GHz	600 MHz
Analog Devices LTC1550LCGN#PBF			16-SSOP		0 °C	70 °C		16-SSOP			Surface Mount							Negative		900 kHz	0.154 in	3.9 mm	-4.8 V	Adjustable	1	-1.225 V	5.5 V	2.7 V	Step-Up/Step-Down
Analog Devices LTC2664CUH-16#TRPBF			32-QFN (5x5)		0 °C	70 °C					Surface Mount													Voltage - Buffered						4	20 µs		1.71 V	5.5 V	-4.5 V	15.75 V	External Internal	16	0.35 LSB 2.2 LSB	SPI
Analog Devices LTC2356CMSE-14#TRPBF			10-MSOP-EP		0 °C	70 °C		10-MSOP 10-TFSOP Exposed Pad			Surface Mount																						3.1 V	3.6 V	3.1 V	3.6 V	External Internal	14		SPI	1:1	1	SAR	Differential Single Ended	0.118 in 3 Lead	S/H-ADC	1	3.5 M
Analog Devices LTC6820IMS#TRPBF			16-MSOP					16-TFSOP			Surface Mount																																						2.7 V	5.5 V	SPI
Analog Devices LT1959CR#PBF			DDPAK-7		0 °C	125 ¯C		D2PAK (7 Leads + Tab) TO-263-8 TO-263CA			Surface Mount							Positive		500 kHz			12.9 V	Adjustable	1	1.21 V	15 V	4.3 V	Step-Down																							Buck SEPIC
Analog Devices ADP171AUJZ-R7					-40 °C	125 °C		SOT-23-5 Thin TSOT-23-5			Surface Mount							Positive					3 V	Adjustable		0.8 V	3.6 V																										Over Current Over Temperature Under Voltage Lockout (UVLO)	260 µA	60 µA	73 dB	47 dB	300 mA	1	0.135 V	Enable
Analog Devices AD767KN			24-PDIP		0 °C	70 °C		24-DIP			Through Hole										0.3 in	7.62 mm		Voltage - Buffered							3 µs				-11.4 V	16.5 V	External Internal	12 bits		Parallel			Current Steering
Analog Devices LTC2634CUD-LMX10#TRPBF			16-QFN (3x3)		0 °C	70 °C		16-WFQFN Exposed Pad			Surface Mount													Voltage - Buffered						4	3.8 µs		2.7 V	5.5 V	2.7 V	5.5 V	External Internal		0.2 LSB 0.5 LSB	SPI																						10

Series	Category	# Parts	Status	Description

Analog DevicesLTC4070Li-Ion/Polymer Shunt Battery Charger System	Battery Chargers	5	1	The LTC4070 allows simple charging of Li-Ion/Polymer batteries from very low current, intermittent or continuous charging sources. The 450nA to 50mA operating current makes charging possible from previously unusable sources. With the addition of an external pass device, shunt current may be boosted to 500mA. Stacked cell high voltage battery... Read More
Analog DevicesLTC4071Li-Ion/Polymer Shunt Battery Charger System with Low Battery Disconnect	PMIC	3	1	The LTC4071 allows simple charging of Li-Ion/Polymer batteries from very low current, intermittent or continuous charging sources. A near-zero current low battery latching disconnect function protects even the lowest capacity batteries from deep discharge and potentially irreparable damage. The 550nA to 50mA operating current makes charging possible from previously unusable... Read More
Analog DevicesLTC4075LTC4075XDual Input USB/AC Adapter Standalone Li-Ion Battery Chargers	Integrated Circuits (ICs)	2	1	The LTC4075HVX is a standalone linear charger that is capable of charging a single-cell Li-Ion/Polymer battery from both wall adapter and USB inputs. The charger can detect power at the inputs and automatically select the appropriate power source for charging.No external sense resistor or blocking diode is required for charging... Read More
Analog DevicesLTC4078LTC4078XDual Input Li-Ion Battery Charger with Overvoltage Protection	PMIC	4	1	The LTC4078/LTC4078X are standalone linear chargers that are capable of charging a single-cell Li-Ion/Polymer battery from both wall adapter and USB inputs. The chargers can detect power at the inputs and automatically select the appropriate power source for charging.No external sense resistor or blocking diode is required for charging due... Read More
Analog DevicesLTC407960V, 250mA Linear Charger with Low Quiescent Current	PMIC	1	1	The LTC4079 is a low quiescent current, high voltage linear charger for most battery chemistry types including Li-Ion/Polymer, LiFePO4, Lead-Acid or NiMH battery stacks up to 60V. The maximum charge current is adjustable from 10mA to 250mA with an external resistor. The battery charge voltage is set using an external... Read More
Analog DevicesLTC4080X500mA Standalone Li-Ion Charger with Integrated 300mA Synchronous Buck in 3mm × 3mm DFN	PMIC	2	1	The LTC4080X is a complete constant-current/constant-voltage linear battery charger for a single-cell 4.2V lithium-ion/polymer battery with an integrated 300mA synchronous buck converter. A 3mm × 3mm DFN package and low external component count make the LTC4080X especially suitable for portable applications. Furthermore, the LTC4080X is specifically designed to work within... Read More
Analog DevicesLTC4085-3LTC4085-4USB Power Manager with Ideal Diode Controller and 3.95V Li-Ion Charger	PMIC	4	1	The LTC4085-3/LTC4085-4 is a USB power manager and Li-Ion/Polymer battery charger designed for portable battery-powered applications. The part controls the total current used by the USB peripheral for operation and battery charging. The total input current can be limited to 20% or 100% of a programmed value up to 1.5A... Read More
Analog DevicesLTC4088-1LTC4088-2High Efficiency Battery Charger/USB Power Manager with Regulated Output Voltage	Integrated Circuits (ICs)	3	1	The LTC4088-1/LTC4088-2 is a high efficiency USB PowerPath™controller and Li-Ion/Polymer battery charger. It includes a synchronous switching input regulator, a full-featured battery charger and an ideal diode. Designed specifically for USB applications, the LTC4088-1/LTC4088-2's switching regulator automatically limits its input current to either 100mA, 500mA or 1A via logic control.... Read More
Analog DevicesLTC4089-3USB Power Manager with High Voltage Switching Charger	Integrated Circuits (ICs)	2	1	The LTC4089-3 is a USB power manager plus high voltage Li-Ion battery charger. This device controls the total current used by the USB peripheral for operation and battery charging. Battery charge current is automatically reduced such that the sum of the load current and the charge current does not exceed... Read More
Analog DevicesLTC4090LTC4090-5USB Power Manager with 2A High Voltage Bat-Track Buck Regulator	PMIC	6	1	The LTC4090-3 is a USB power manager plus high voltage Li-Ion/Polymer battery charger. The device controls the total current used by the USB peripheral for operation and battery charging. Battery charge current is automatically reduced such that the sum of the load current and the charge current does not exceed... Read More