M
Micronel USA
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
This manufacturer doesn't have any product series listed yet. Check back later or contact us if you're looking for specific parts.
| Part | Material - Blade | Termination | Bearing Type | Size / Dimension [y] | Size / Dimension [x] | Voltage - Rated | RPM | Features | Current Rating (Amps) | Static Pressure | Static Pressure | Width [x] | Operating Temperature [Max] | Operating Temperature [Min] | Operating Temperature [Max] | Operating Temperature [Min] | Material - Frame | Fan Type | Approval Agency | Voltage Range [Min] | Voltage Range [Max] | Noise | Air Flow | Air Flow | Power (Watts) | Lifetime @ Temp. | Ingress Protection | Length | Length | Fan Accessory Type | Width [y] | Size / Dimension [diameter] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Micronel USA | Polyamide (PA6) Nylon 6 | 3 Position Rectangular Connector | Ball | 50 mm | 65 mm | 12 VDC | 38500 RPM | Motor Winding | 2.8 A | 20.876 in H2O | 5200 Pa | 34.5 mm | 40 °C | -20 °C | 40 °C | -20 C | Polycarbonate (PC) | Blower | CE | 8 VDC | 12 V | 58 dB(A) | 0.406 m³/min | 14.5 CFM | ||||||||
Micronel USA | 24 VDC | Tubeaxial | ||||||||||||||||||||||||||||||
Micronel USA | Polyamide (PA6) Nylon 6 | 6 Position Circular Connector | 106 mm | 107 mm | 24 VDC | 43000 RPM | Locked Rotor Protection Speed Control (SP) Speed Sensor (Tach) | 10 A | 45.767 in H2O | 11400 Pa | 117 mm | 113 F | -20 °C | 45 °C | -4 F | Aluminum | Blower | CE cURus | 55 dB | 0.854 m³/min | 30.5 CFM | 161 W | 20000 Hrs | IP67 - Dust Tight Waterproof | ||||||||
Micronel USA | 24 VDC | Tubeaxial | ||||||||||||||||||||||||||||||
Micronel USA | 2.42 " | 61.5 mm | Motor Driver | |||||||||||||||||||||||||||||
Micronel USA | 6 VDC | Tubeaxial | ||||||||||||||||||||||||||||||
Micronel USA | Polyamide (PA6) Nylon 6 | 4 Wire Leads | Ball | 50 mm | 65 mm | 12 VDC | 40200 RPM | Speed Control (SP) Speed Sensor (Tach) | 2.7 A | 16.861 in H2O | 4200 Pa | 55 °C | -20 °C | 55 °C | -20 C | Polycarbonate (PC) | Blower | CE | 9 V | 15 V | 61 dB(A) | 0.434 m³/min | 15.5 CFM | 15000 Hrs | 48.5 mm | |||||||
Micronel USA | 6 VDC | IDE Interface PWM Control | 1.365 in H2O | 340 Pa | Tubeaxial | 30 mm | ||||||||||||||||||||||||||
Micronel USA | 6 VDC | Tubeaxial | ||||||||||||||||||||||||||||||
Micronel USA | Motor Choke |