X-NUCLEO-IHM11M1 Series

Low voltage three-phase brushless DC motor driver expansion board based on STSPIN233 for STM32 Nucleo

Catalog

Low voltage three-phase brushless DC motor driver expansion board based on STSPIN233 for STM32 Nucleo

Part	Function	Contents	Platform	Type	Utilized IC / Part	Interconnect System
STMicroelectronics X-NUCLEO-IHM12A1	Motor Controller/Driver	Board(s)	Nucleo	Power Management
STMicroelectronics X-NUCLEO-IHM11M1	Motor Controller/Driver	Board(s)	Nucleo	Power Management	STSPIN230
STMicroelectronics X-NUCLEO-IHM02A1	Motor Controller/Driver	Board(s)	Nucleo	Power Management	L6470
STMicroelectronics X-NUCLEO-IHM06A1	Motor Controller/Driver	Board(s)	Nucleo	Power Management	STSPIN220
STMicroelectronics X-NUCLEO-IHM17M1	Motor Controller/Driver	Board(s)	Nucleo	Power Management	STSPIN233
STMicroelectronics X-NUCLEO-IKS01A3	Accelerometer Gyroscope Humidity Magnetometer Pressure Temperature	Board(s)	Nucleo	Sensor	HTS221 LIS2DW12 LIS2MDL LPS22HH LSM6DO STTS751	Arduino R3 Shield DIL24
STMicroelectronics X-NUCLEO-IHM04A1	Motor Controller/Driver	Board(s)	Nucleo	Power Management	L6206
STMicroelectronics X-NUCLEO-LED16A1	LED Driver	Board(s)	Nucleo	Power Management	LED1642GW
STMicroelectronics X-NUCLEO-NFC03A1	Near Field Communication (NFC)	Board(s)	Nucleo	RF	CR95HF
STMicroelectronics X-NUCLEO-IHM08M1	Motor Controller/Driver	Board(s)	Nucleo	Power Management	STL220N6F7

Catalog

Low voltage three-phase brushless DC motor driver expansion board based on STSPIN233 for STM32 Nucleo

Key Features

• 3.3 V digital voltage supply may be provided by:

- the STM32 Nucleo board

- the step-down monolithic power switching regulator soldered on the expansion board (through jumper selection, it can also be used to supply the STM32 Nucleo board

• USART communication

- enables receiving of commands from a PC

- enables sending information to a PC

- Requires no dedicated cable; uses the Type A to Type Mini-B USB cable already used to supply the STM32 Nucleo board

• Five LEDs:

- 2 green, to indicate that each L6470 is powered

- 1 orange, to indicate that the digital voltage is on

- 1 yellow, to indicate when any L6470 is busy

- 1 red, to indicate when a fault condition occurs (step loss, OCD, thermal pre-warning or shutdown, UVLO, incorrect command, non-performable command) for any L6470

Description

The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards. The M24LR04E-R is an NFC Type V/RFID tag IC with a dual-interface 4 Kbit Electrically Erasable Programmable Read-Only Memory (EEPROM) that also features an I2C interface. The EEPROM is organized as 512 x 8 bit in the I2C mode and as 128 x 32 bit in RF mode. It can be operated either from an external power supply or directly powered by the received carrier electromagnetic field. The tag provides an user configurable digital output pin toggling during either RF Write in Progress or RF Busy mode. The M24LR04E-R provides an Energy Harvesting mode. When activated, the M24LR04E-R delivers the excess energy coming from the RF field on the Vout analog pin. In case the RF field strength is insufficient or when Energy Harvesting mode is disabled, the analog output pin Vout goes into high-Z state and Energy Harvesting mode is automatically stopped. The X-NUCLEO-NFC02A1 is compatible with the Arduino™ UNO R3 connector pin assignment and interfaces with the STM32 MCU via the I2C pins.