STK57FU394AG-E Series

Intelligent Power Module (IPM), 2-in-1 PFC and Inverter, 600 V, 15 A

Catalog

Intelligent Power Module (IPM), 2-in-1 PFC and Inverter, 600 V, 15 A

Part	Fault Protection	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply [Min]	Voltage - Supply [Max]	Load Type	Voltage - Load	Package / Case	Current - Peak Output	Technology	Output Configuration	Interface	Supplier Device Package	Applications	Current - Output / Channel [custom]	Mounting Type	Features	Operating Temperature
ON Semiconductor STK57FU391A-E	UVLO	150 °C	-20 °C	12.5 V	17.5 V	Inductive	400 V	35-SSIP 25 Leads Formed Leads	30 A	IGBT	Half Bridge (3)	Logic	35-SIP	AC Motors	15 A	Through Hole	Bootstrap Circuit
ON Semiconductor STK57FU394A-E				12.5 V	17 V	Inductive	400 V	35-SSIP 25 Leads Formed Leads	30 A	Bipolar	Half Bridge (3)		35-SIP	AC Motors	15 A	Through Hole		150 °C
ON Semiconductor STK57FU394AG-E	Current Limiting UVLO			12.5 V	17.5 V	Inductive	400 V	35-SSIP 25 Leads	30 A	IGBT	Half Bridge (3)	Logic	35-SIP/SIP2A-3	AC Motors DC Motors General Purpose	15 A	Through Hole	Bootstrap Circuit	150 °C

Catalog

Intelligent Power Module (IPM), 2-in-1 PFC and Inverter, 600 V, 15 A

Key Features

• Simple thermal design with PFC and inverter stage in one package

• PFC operating frequency up to 40 kHz

• Cross-conduction protection

• Integrated bootstrap diodes and resistors

• Enable pin

• Adjustable over-current protection level

Description

The STK57FU394AG-E is a fully-integrated PFC and inverter power module consisting of a high-voltage driver, six motor drive IGBTs, one PFC IGBT, one PFC rectifier and a thermistor, suitable for driving permanent magnet synchronous (PMSM) motors, brushless-DC (BLDC) motors and AC asynchronous motors. The IGBTs are configured in a 3-phase bridge with separate emitter connections for the lower legs for maximum flexibility in the choice of control algorithm. An internal comparator and reference connected to the over-current protection circuit allows the designer to set individual over-current protection levels for the PFC and the inverter stages. Additionally, the power stage has a full range of protection functions including crossconduction protection, external shutdown and under-voltage lockout functions.