Technical Specifications
Parameters and characteristics for this part
| Specification | VND5E050MCKTR-E |
|---|---|
| Current - Output (Max) [Max] | 19 A |
| Fault Protection | Over Temperature, Current Limiting (Fixed), Over Voltage |
| Features | Auto Restart |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 24-PowerBSOP |
| Package / Case [y] | 7.5 mm |
| Package / Case [y] | 0.295 in |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 50 mOhm |
| Supplier Device Package | PowerSSO-24 |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 28 V |
| Voltage - Load [Min] | 4.5 V |
| Voltage - Supply (Vcc/Vdd) | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 1000 | $ 2.00 | |
| 2000 | $ 1.90 | |||
| 5000 | $ 1.83 | |||
Description
General part information
VND5E050ACK-E Series
The VND5E050ACJ-E and VND5E050ACK-E are double channel high-side drivers manufactured using ST proprietary VIPower®M0-5 technology and housed in PowerSSO-12 and PowerSSO-24 packages. The devices are designed to drive 12 V automotive grounded loads, and to provide protection and diagnostics. They also implement a 3 V and 5 V CMOS-compatible interface for use with any microcontroller.
The devices integrate advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off withauto-restart and overvoltage active clamp. A dedicated analog current sense pin is associated with every output channel providing enhanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication, overtemperature indication, short-circuit to VCCdiagnosis on-state and off-state open-load detection.
The current sensing and diagnostic feedback of the whole device can be disabled by pulling the CS_DIS pin high to share the external sense resistor with similar devices.
Documents
Technical documentation and resources