A
Analog Devices
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Reset Timeout [Min] | Reset | Supplier Device Package | Voltage - Threshold | Operating Temperature [Min] | Operating Temperature [Max] | Number of Voltages Monitored | Package / Case | Output | Type | Mounting Type | Current - Supply | Voltage - Supply | RF Type | Frequency [Min] | Frequency [Max] | Test Frequency | Output Configuration | Synchronous Rectifier | Frequency - Switching | Package / Case | Package / Case | Voltage - Output (Max) [Max] | Output Type | Number of Outputs | Voltage - Output (Min/Fixed) | Voltage - Input (Max) [Max] | Voltage - Input (Min) [Min] | Function | Number of D/A Converters | Settling Time | Differential Output | Voltage - Supply, Digital [Min] | Voltage - Supply, Digital [Max] | Voltage - Supply, Analog [Min] | Voltage - Supply, Analog [Max] | Reference Type | Number of Bits | INL/DNL (LSB) | Data Interface | Ratio - S/H:ADC | Number of A/D Converters | Architecture | Input Type | Package / Case | Configuration | Number of Inputs | Sampling Rate (Per Second) | Voltage - Supply [Min] | Voltage - Supply [Max] | Interface | Topology | Protection Features | Current - Supply (Max) [Max] | Current - Quiescent (Iq) | PSRR [Max] | PSRR [Min] | Current - Output | Number of Regulators | Voltage Dropout (Max) [Max] | Control Features | Number of Bits [custom] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices | 140 ms | Active Low | SC-70-4 | 2.63 V | -40 °C | 125 °C | 1 | SC-82A SOT-343 | Open Drain or Open Collector | Simple Reset/Power-On Reset | Surface Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | Die | Die | Surface Mount | 80 mA | 3.3 V | General Purpose | 600 MHz | 20 GHz | 600 MHz | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-SSOP | 0 °C | 70 °C | 16-SSOP | Surface Mount | Negative | 900 kHz | 0.154 in | 3.9 mm | -4.8 V | Adjustable | 1 | -1.225 V | 5.5 V | 2.7 V | Step-Up/Step-Down | ||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 32-QFN (5x5) | 0 °C | 70 °C | Surface Mount | Voltage - Buffered | 4 | 20 µs | 1.71 V | 5.5 V | -4.5 V | 15.75 V | External Internal | 16 | 0.35 LSB 2.2 LSB | SPI | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 10-MSOP-EP | 0 °C | 70 °C | 10-MSOP 10-TFSOP Exposed Pad | Surface Mount | 3.1 V | 3.6 V | 3.1 V | 3.6 V | External Internal | 14 | SPI | 1:1 | 1 | SAR | Differential Single Ended | 0.118 in 3 Lead | S/H-ADC | 1 | 3.5 M | ||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-MSOP | 16-TFSOP | Surface Mount | 2.7 V | 5.5 V | SPI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | DDPAK-7 | 0 °C | 125 ¯C | D2PAK (7 Leads + Tab) TO-263-8 TO-263CA | Surface Mount | Positive | 500 kHz | 12.9 V | Adjustable | 1 | 1.21 V | 15 V | 4.3 V | Step-Down | Buck SEPIC | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | -40 °C | 125 °C | SOT-23-5 Thin TSOT-23-5 | Surface Mount | Positive | 3 V | Adjustable | 0.8 V | 3.6 V | Over Current Over Temperature Under Voltage Lockout (UVLO) | 260 µA | 60 µA | 73 dB | 47 dB | 300 mA | 1 | 0.135 V | Enable | ||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 24-PDIP | 0 °C | 70 °C | 24-DIP | Through Hole | 0.3 in | 7.62 mm | Voltage - Buffered | 3 µs | -11.4 V | 16.5 V | External Internal | 12 bits | Parallel | Current Steering | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-QFN (3x3) | 0 °C | 70 °C | 16-WFQFN Exposed Pad | Surface Mount | Voltage - Buffered | 4 | 3.8 µs | 2.7 V | 5.5 V | 2.7 V | 5.5 V | External Internal | 0.2 LSB 0.5 LSB | SPI | 10 |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Linear | 1 | 8 | Rail-to-rail output swing combined with dc accuracy are the key features of the OP495 quad and OP295 dual CBCMOS operational amplifiers. By using a bipolar front end, lower noise and higher accuracy than those of CMOS designs have been achieved. Both input and output ranges include the negative supply, providing... Read More | |
| Integrated Circuits (ICs) | 2 | 1 | The OP196 family of CBCMOS operational amplifiers features micropower operation and rail-to-rail input and output ranges.The extremely low power requirements and guaranteed operation from +3 V to +12 V make these amplifiers perfectly suited to monitor battery usage and to control battery charging. Their dynamic performance, including 26 nV/(root)Hz voltage... Read More | |
| Instrumentation, Op Amps, Buffer Amps | 2 | 8 | The OP297 is the first dual op amp to pack precision performance into the space-saving, industry standard 8-pin SO package. Its combination of precision with low power and extremely low input bias current makes the dual OP297 useful in a wide variety of applications.Precision performance of the OP297 includes very... Read More | |
| Linear | 7 | 1 | The OP-27/OP-37 series of operational amplifiers combine outstanding noise performance with excellent precision and high speed specifications. The wideband noise is only 3nV/√Hz, and with the 1/f noise corner at 2.7Hz, low noise is maintained for all low frequency instrumentation applications. Precision DC specifications match or exceed the best available... Read More | |
| Integrated Circuits (ICs) | 3 | 1 | The OPx13 family of single-supply operational amplifiers features both low noise and drift. It has been designed for systems with internal calibration. Often these processor-based systems are capable of calibrating corrections for offset and gain, but they cannot correct for temperature drifts and noise. Optimized for these parameters, the OPx13... Read More | |
| Integrated Circuits (ICs) | 2 | 8 | The OPx177 family consists of very high precision, single, dual, and quad amplifiers featuring extremely low offset voltage and drift, low input bias current, low noise, and low power consump-tion. Outputs are stable with capacitive loads of over 1000 pF with no external compensation. Supply current is less than 500... Read More | |
| Instrumentation, Op Amps, Buffer Amps | 3 | 1 | The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly suited for precision filter applications and... Read More | |
| Amplifiers | 1 | 1 | The OP467 is a quad, high speed, precision operational amplifier. It offers the performance of a high speed op amp combined with the advantages of a precision op amp in a single package. The OP467 is an ideal choice for applications where, traditionally, more than one op amp was used... Read More | |
| Linear | 1 | 8 | The OP281 and OP481 are dual and quad ultralow power single-supply amplifiers featuring rail-to-rail outputs. Each operates from supplies as low as 2.0 V and is specified at +3 V and +5 V single supplies as well as ±5 V dual supplies.Fabricated on Analog Devices’ CBCMOS process, the OP281/OP481 feature... Read More | |
| Integrated Circuits (ICs) | 3 | 1 | The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. Slew rate exceeds 7 V/µs with supply current under 250 µA per amplifier. these unity gain stable amplifiers have a typical gain bandwidth of 4 MHz.The JFET input stage of the OP282/OP482 insures bias current... Read More | |