A
Analog Devices
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Reset Timeout [Min] | Reset | Supplier Device Package | Voltage - Threshold | Operating Temperature [Min] | Operating Temperature [Max] | Number of Voltages Monitored | Package / Case | Output | Type | Mounting Type | Current - Supply | Voltage - Supply | RF Type | Frequency [Min] | Frequency [Max] | Test Frequency | Output Configuration | Synchronous Rectifier | Frequency - Switching | Package / Case | Package / Case | Voltage - Output (Max) [Max] | Output Type | Number of Outputs | Voltage - Output (Min/Fixed) | Voltage - Input (Max) [Max] | Voltage - Input (Min) [Min] | Function | Number of D/A Converters | Settling Time | Differential Output | Voltage - Supply, Digital [Min] | Voltage - Supply, Digital [Max] | Voltage - Supply, Analog [Min] | Voltage - Supply, Analog [Max] | Reference Type | Number of Bits | INL/DNL (LSB) | Data Interface | Ratio - S/H:ADC | Number of A/D Converters | Architecture | Input Type | Package / Case | Configuration | Number of Inputs | Sampling Rate (Per Second) | Voltage - Supply [Min] | Voltage - Supply [Max] | Interface | Topology | Protection Features | Current - Supply (Max) [Max] | Current - Quiescent (Iq) | PSRR [Max] | PSRR [Min] | Current - Output | Number of Regulators | Voltage Dropout (Max) [Max] | Control Features | Number of Bits [custom] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices | 140 ms | Active Low | SC-70-4 | 2.63 V | -40 °C | 125 °C | 1 | SC-82A SOT-343 | Open Drain or Open Collector | Simple Reset/Power-On Reset | Surface Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | Die | Die | Surface Mount | 80 mA | 3.3 V | General Purpose | 600 MHz | 20 GHz | 600 MHz | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-SSOP | 0 °C | 70 °C | 16-SSOP | Surface Mount | Negative | 900 kHz | 0.154 in | 3.9 mm | -4.8 V | Adjustable | 1 | -1.225 V | 5.5 V | 2.7 V | Step-Up/Step-Down | ||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 32-QFN (5x5) | 0 °C | 70 °C | Surface Mount | Voltage - Buffered | 4 | 20 µs | 1.71 V | 5.5 V | -4.5 V | 15.75 V | External Internal | 16 | 0.35 LSB 2.2 LSB | SPI | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 10-MSOP-EP | 0 °C | 70 °C | 10-MSOP 10-TFSOP Exposed Pad | Surface Mount | 3.1 V | 3.6 V | 3.1 V | 3.6 V | External Internal | 14 | SPI | 1:1 | 1 | SAR | Differential Single Ended | 0.118 in 3 Lead | S/H-ADC | 1 | 3.5 M | ||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-MSOP | 16-TFSOP | Surface Mount | 2.7 V | 5.5 V | SPI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | DDPAK-7 | 0 °C | 125 ¯C | D2PAK (7 Leads + Tab) TO-263-8 TO-263CA | Surface Mount | Positive | 500 kHz | 12.9 V | Adjustable | 1 | 1.21 V | 15 V | 4.3 V | Step-Down | Buck SEPIC | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | -40 °C | 125 °C | SOT-23-5 Thin TSOT-23-5 | Surface Mount | Positive | 3 V | Adjustable | 0.8 V | 3.6 V | Over Current Over Temperature Under Voltage Lockout (UVLO) | 260 µA | 60 µA | 73 dB | 47 dB | 300 mA | 1 | 0.135 V | Enable | ||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 24-PDIP | 0 °C | 70 °C | 24-DIP | Through Hole | 0.3 in | 7.62 mm | Voltage - Buffered | 3 µs | -11.4 V | 16.5 V | External Internal | 12 bits | Parallel | Current Steering | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-QFN (3x3) | 0 °C | 70 °C | 16-WFQFN Exposed Pad | Surface Mount | Voltage - Buffered | 4 | 3.8 µs | 2.7 V | 5.5 V | 2.7 V | 5.5 V | External Internal | 0.2 LSB 0.5 LSB | SPI | 10 |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Integrated Circuits (ICs) | 3 | 6 | The LTC6405 is a very low noise, low distortion, fully differential input/output amplifier optimized for 5V, single supply operation. The LTC6405 input common mode range is rail-to-rail, while the output common mode voltage is independently adjustable by applying a voltage on the VOCMpin. This makes the LTC6405 ideal for level... Read More | |
| Special Purpose Amplifiers | 4 | 6 | The LTC6406 is a very low noise, low distortion, fully differential input/output amplifier optimized for 3V, single supply operation. The LTC6406 input common mode range is rail-to-rail, while the output common mode voltage is independently adjustable by applying a voltage on the VOCMpin. This makes the LTC6406 ideal for level... Read More | |
| Special Purpose | 3 | 1 | The LTC6409 is a very high speed, low distortion, differential amplifier. Its input common mode range includes ground, so that a ground-referenced input signal can be DC-coupled, level-shifted, and converted to drive an ADC differentially.The gain and feedback resistors are external, so that the exact gain and frequency response can... Read More | |
Analog DevicesLTC6410-6Low Distortion, Low Noise Differential IF Amplifier with Configurable Input Impedance | Instrumentation, Op Amps, Buffer Amps | 2 | 6 | The LTC6410-6 is a low distortion, low noise differential IF amplifier with configurable input impedance designed for use in applications from DC to 1.4GHz. The LTC6410-6 has 6dB of voltage gain. The LTC6410-6 is an excellent choice for interfacing active mixers to SAW filters. It features an active input termination... Read More |
| Amplifiers | 2 | 6 | The LTC6412 is a fully differential variable gain amplifier with linear-in-dB analog gain control. It is designed for AC-coupled operation in IF receiver chains from 1MHz to 500MHz. The part has a constant OIP3 across a wide output amplitude range and across the 31dB gain control range. The output noise... Read More | |
| Instrumentation, Op Amps, Buffer Amps | 2 | 6 | The LTC6416 is a differential unity gain buffer designed to drive 16-bit ADCs with extremely low output noise and excellent linearity beyond 300MHz. Differential input impedance is 12kΩ, allowing 1:4 and 1:8 transformers to be used at the input to achieve additional system gain.With no external biasing or gain setting... Read More | |
Analog DevicesLTC64171.6GHz Low Noise High Linearity Differential Buffer/16-Bit ADC Driver with Fast Clamp | Instrumentation, Op Amps, Buffer Amps | 1 | 6 | The LTC6417 is a differential unity gain buffer that can drive a 50Ω load with extremely low noise and excellent linearity. It is well suited for driving high speed 14- and 16-bit pipeline ADCs with input signals from DC to beyond 600MHz. Differential input impedance is 18.5kΩ, allowing 1:4 and... Read More |
| Linear | 1 | 1 | The LTC6419 is a dual very high speed, low distortion, differential amplifier. Its input common mode range includes ground, so that a ground-referenced single-ended or differential input signal can be DC-coupled, level-shifted, and converted to drive an ADC differentially.The gain and feedback resistors are external, so that the exact gain... Read More | |
| Special Purpose Amplifiers | 1 | 8 | The LTC6420-20 is a dual high-speed differential amplifier targeted at processing signals from DC to 300MHz. The part has been specifically designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but can also be used as a general-purpose broadband gain block.The LTC6420-20 is easy to... Read More | |
| Special Purpose | 3 | 6 | The LTC6421-20 is a dual high speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but can also be used as a general-purpose broadband gain block.The LTC6421-20 is easy... Read More | |