UCC27712-Q1 Series
Automotive 1.8-A/2.8-A, 620V half bridge gate driver with interlock
Manufacturer: Texas Instruments
Catalog
Automotive 1.8-A/2.8-A, 620V half bridge gate driver with interlock
| Part | Utilized IC / Part | Function | Type | Supplied Contents | Current - Peak Output (Source, Sink) [custom] | Current - Peak Output (Source, Sink) [custom] | Mounting Type | Channel Type | Logic Voltage - VIL, VIH [custom] | Logic Voltage - VIL, VIH [custom] | Operating Temperature [Min] | Operating Temperature [Max] | Rise / Fall Time (Typ) [custom] | Rise / Fall Time (Typ) [custom] | Grade | Voltage - Supply [Max] | Voltage - Supply [Min] | Supplier Device Package | Driven Configuration | High Side Voltage - Max (Bootstrap) [Max] | Package / Case | Package / Case [y] | Package / Case [x] | Qualification | Number of Drivers |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments | UCC27712 | Gate Driver | Power Management | Board(s) | |||||||||||||||||||||
Texas Instruments | 1.8 A | 2.8 A | Surface Mount | Independent | 1.5 V | 1.6 V | -40 °C | 125 ¯C | 10 ns | 16 ns | Automotive | 20 V | 10 VDC | 8-SOIC | Half-Bridge | 600 V | 8-SOIC | 3.9 mm | 0.154 in | AEC-Q100 | 2 | ||||
Texas Instruments | 1.8 A | 2.8 A | Surface Mount | Independent | -40 °C | 125 °C | 10 ns | 16 ns | 20 V | 10 VDC | 8-SOIC | Half-Bridge | 600 V | 8-SOIC | 3.9 mm | 0.154 in | 2 | ||||||||
Texas Instruments | 1.8 A | 2.8 A | Surface Mount | Independent | -40 °C | 125 °C | 10 ns | 16 ns | Automotive | 20 V | 10 VDC | 8-SOIC | Half-Bridge | 600 V | 8-SOIC | 3.9 mm | 0.154 in | AEC-Q100 | 2 |
Key Features
• AEC-Q100 Qualified for Automotive ApplicationDevice HBM Classification Level 1CDevice CDM Classification Level C4BHigh-Side and Low-Side ConfigurationDual Inputs With Output Interlock and 150-ns DeadtimeFully Operational up to 620-V, 700-V Absolute Maximum on HB Pin10-V to 20-V VDD Recommended RangePeak Output Current 2.8-A Sink, 1.8-A Sourcedv/dt Immunity of 50 V/nsLogic Operational up to –11 V on HS PinNegative Voltage Tolerance On Inputs of –5 VLarge Negative Transient Safe Operating AreaUVLO Protection for Both ChannelsSmall Propagation Delay (100-ns Typical)Delay Matching (12-ns Typical)Low Quiescent CurrentTTL and CMOS Compatible InputsIndustry Standard SOIC-8 PackageAll Parameters Specified Over Temperature Range, –40 °C to +125 °CAEC-Q100 Qualified for Automotive ApplicationDevice HBM Classification Level 1CDevice CDM Classification Level C4BHigh-Side and Low-Side ConfigurationDual Inputs With Output Interlock and 150-ns DeadtimeFully Operational up to 620-V, 700-V Absolute Maximum on HB Pin10-V to 20-V VDD Recommended RangePeak Output Current 2.8-A Sink, 1.8-A Sourcedv/dt Immunity of 50 V/nsLogic Operational up to –11 V on HS PinNegative Voltage Tolerance On Inputs of –5 VLarge Negative Transient Safe Operating AreaUVLO Protection for Both ChannelsSmall Propagation Delay (100-ns Typical)Delay Matching (12-ns Typical)Low Quiescent CurrentTTL and CMOS Compatible InputsIndustry Standard SOIC-8 PackageAll Parameters Specified Over Temperature Range, –40 °C to +125 °C
Description
AI
The UCC27712-Q1 is a 620-V high-side and low-side gate driver with 1.8-A source, 2.8-A sink current, targeted to drive power MOSFETs or IGBTs.
The recommended VDD operating voltage is 10-V to 20-V for IGBT’s and 10-V to 17-V for power MOSFETs.
The UCC27712-Q1 includes protection features where the outputs are held low when the inputs are left open or when the minimum input pulse width specification is not met. Interlock and deadtime functions prevent both outputs from being turned on simultaneously. In addition, the device accepts a wide range bias supply range from 10 V to 22 V, and offers UVLO protection for both the VDD and HB bias supply.
Developed with TI’s state of the art high-voltage device technology, the device features robust drive with excellent noise and transient immunity including large negative voltage tolerance on its inputs, high dV/dt tolerance, wide negative transient safe operating area (NTSOA) on the switch node (HS), and interlock.
The device consists of one ground-referenced channel (LO) and one floating channel (HO) which is designed for operating with bootstrap or isolated power supplies. The device features fast propagation delays and excellent delay matching between both channels. On the UCC27712-Q1, each channel is controlled by its respective input pins, HI and LI.
The UCC27712-Q1 is a 620-V high-side and low-side gate driver with 1.8-A source, 2.8-A sink current, targeted to drive power MOSFETs or IGBTs.
The recommended VDD operating voltage is 10-V to 20-V for IGBT’s and 10-V to 17-V for power MOSFETs.
The UCC27712-Q1 includes protection features where the outputs are held low when the inputs are left open or when the minimum input pulse width specification is not met. Interlock and deadtime functions prevent both outputs from being turned on simultaneously. In addition, the device accepts a wide range bias supply range from 10 V to 22 V, and offers UVLO protection for both the VDD and HB bias supply.
Developed with TI’s state of the art high-voltage device technology, the device features robust drive with excellent noise and transient immunity including large negative voltage tolerance on its inputs, high dV/dt tolerance, wide negative transient safe operating area (NTSOA) on the switch node (HS), and interlock.
The device consists of one ground-referenced channel (LO) and one floating channel (HO) which is designed for operating with bootstrap or isolated power supplies. The device features fast propagation delays and excellent delay matching between both channels. On the UCC27712-Q1, each channel is controlled by its respective input pins, HI and LI.