UCC27714 Series

4-A, 600-V half bridge gate driver

Catalog

4-A, 600-V half bridge gate driver

Part	Channel Type	Gate Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Rise / Fall Time (Typ) [custom]	Rise / Fall Time (Typ) [custom]	Number of Drivers	Logic Voltage - VIL, VIH	Mounting Type	High Side Voltage - Max (Bootstrap) [Max]	Package / Case [x]	Package / Case [y]	Package / Case	Operating Temperature [Min]	Operating Temperature [Max]	Input Type	Driven Configuration	Current - Peak Output (Source, Sink) [custom]	Current - Peak Output (Source, Sink) [custom]	Voltage - Input [Min]	Voltage - Input [Max]	Power - Output	Current - Output	Supplied Contents	Board Type	Regulator Topology	Utilized IC / Part	Main Purpose	Outputs and Type	Outputs and Type	Voltage - Output
Texas Instruments UCC27714D	Independent	IGBT N-Channel MOSFET	10 VDC	18 V	15 ns	15 ns	2	1.2 V 2.7 V	Surface Mount	600 V	0.154 in	3.9 mm	14-SOIC	-40 °C	125 ¯C	Non-Inverting	Half-Bridge	4 A	4 A
Texas Instruments UCC27714EVM-551																				370 V	410 V	600 W	50 A	Board(s)	Fully Populated	Full-Bridge	UCC27524A UCC27714 UCC28950	DC/DC Step Down	Isolated	1	12 V
Texas Instruments UCC27714DR	Independent	IGBT N-Channel MOSFET	10 VDC	18 V	15 ns	15 ns	2	1.2 V 2.7 V	Surface Mount	600 V	0.154 in	3.9 mm	14-SOIC	-40 °C	125 ¯C	Non-Inverting	Half-Bridge	4 A	4 A

Catalog

4-A, 600-V half bridge gate driver

Key Features

• High-Side, Low-Side Configuration, with Independent InputsFully Operational up to 600 V (HS Pin)Floating Channel Designed for Bootstrap OperationPeak Output Current Capability of 4-A Sink 4-A Source at VDD = 15 VBest-In-Class Propagation Delay (125-ns Maximum)Best-In-Class Delay Matching (20-ns Maximum)TTL and CMOS Compatible Input LogicVDD Bias Supply Range of 10 V to 20 VBias UVLO Protection for Both ChannelsRail-to-Rail DriveRobust Operation Under Negative Voltage TransientsHigh dv/dt Immunity (HS Pin)Separated Grounds for Logic (VSS) and Driver (COM) with Capability to Sustain Voltage DifferenceOptional Enable Function (Pin 4)Outputs Held in LOW when Inputs FloatingInputs and Enable Pin Voltage Levels Not Restricted by VDD Pin Bias Supply VoltageHigh and Low Voltage Pins Separated for Maximum Creepage and ClearanceNegative Voltage Handling Capability on Input and Enable PinsHigh-Side, Low-Side Configuration, with Independent InputsFully Operational up to 600 V (HS Pin)Floating Channel Designed for Bootstrap OperationPeak Output Current Capability of 4-A Sink 4-A Source at VDD = 15 VBest-In-Class Propagation Delay (125-ns Maximum)Best-In-Class Delay Matching (20-ns Maximum)TTL and CMOS Compatible Input LogicVDD Bias Supply Range of 10 V to 20 VBias UVLO Protection for Both ChannelsRail-to-Rail DriveRobust Operation Under Negative Voltage TransientsHigh dv/dt Immunity (HS Pin)Separated Grounds for Logic (VSS) and Driver (COM) with Capability to Sustain Voltage DifferenceOptional Enable Function (Pin 4)Outputs Held in LOW when Inputs FloatingInputs and Enable Pin Voltage Levels Not Restricted by VDD Pin Bias Supply VoltageHigh and Low Voltage Pins Separated for Maximum Creepage and ClearanceNegative Voltage Handling Capability on Input and Enable Pins

Description

UCC27714 is a 600-V high-side, low-side gate driver with 4-A source and 4-A sink current capability, targeted to drive power MOSFETs or IGBTs. The device comprises of one ground-referenced channel (LO) and one floating channel (HO) which is designed for operating with bootstrap supplies. The device features excellent robustness and noise immunity with capability to maintain operational logic at negative voltages of up to –8 VDCon HS pin (at VDD = 12 V). The device accepts a wide range bias supply input from 10 V to 20 V and offers UVLO protection for both the VCC and HB bias supply pins. UCC27714 is available in SOIC-14 package and rated to operate from –40°C to 125°C. UCC27714 is a 600-V high-side, low-side gate driver with 4-A source and 4-A sink current capability, targeted to drive power MOSFETs or IGBTs. The device comprises of one ground-referenced channel (LO) and one floating channel (HO) which is designed for operating with bootstrap supplies. The device features excellent robustness and noise immunity with capability to maintain operational logic at negative voltages of up to –8 VDCon HS pin (at VDD = 12 V). The device accepts a wide range bias supply input from 10 V to 20 V and offers UVLO protection for both the VCC and HB bias supply pins. UCC27714 is available in SOIC-14 package and rated to operate from –40°C to 125°C.