
LTC3784EGN#TRPBF
Active60V POLYPHASE SYNCHRONOUS BOOST CONTROLLER WITH PASSTHRU
Deep-Dive with AI
Search across all available documentation for this part.

LTC3784EGN#TRPBF
Active60V POLYPHASE SYNCHRONOUS BOOST CONTROLLER WITH PASSTHRU
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LTC3784EGN#TRPBF |
|---|---|
| Clock Sync | False |
| Control Features | Current Limit, Power Good, Soft Start, Frequency Control, Enable |
| Duty Cycle (Max) [Max] | 96 % |
| Frequency - Switching [Max] | 760 kHz |
| Frequency - Switching [Min] | 105 kHz |
| Function | Step-Up |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Phases | 2 |
| Output Type | Transistor Driver |
| Package / Case | 28-SSOP |
| Supplier Device Package | 28-SSOP |
| Synchronous Rectifier | True |
| Topology | Boost |
| Voltage - Supply (Vcc/Vdd) [Max] | 60 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 2500 | $ 5.61 | |
Description
General part information
LTC3784 Series
The LTC3784 is a high performance PolyPhase®single output synchronous boost converter controller that drives two N-channel power MOSFET stages out-of-phase. Multiphase operation reduces input and output capacitor requirements and allows the use of smaller inductors than the single-phase equivalent. Synchronous rectification increases efficiency, reduces power losses and eases thermal requirements, simplifying high power boost applications.A 4.5V to 60V input supply range encompasses a wide range of system architectures and battery chemistries. When biased from the output of the boost converter or another auxiliary supply, the LTC3784 can operate from an input supply as low as 2.3V after start-up. The operating frequency can be set within a 50kHz to 900kHz range or synchronized to an external clock using the internal PLL. PolyPhase operation allows the LTC3784 to be configured for 2-, 3-, 4-, 6- and 12-phase operation.The SS pin ramps the output voltage during start-up. The PLLIN/MODE pin selects Burst Mode®operation, pulse-skipping mode or forced continuous mode at light loads.APPLICATIONSIndustrialAutomotiveMedicalMilitary
Documents
Technical documentation and resources