Technical Specifications
Parameters and characteristics for this part
| Specification | AS2333M8-13 |
|---|---|
| Amplifier Type | CMOS |
| Current - Input Bias | 70 pA |
| Current - Output / Channel | 25 mA |
| Current - Supply | 12 µA |
| Gain Bandwidth Product | 350 kHz |
| Mounting Type | Surface Mount |
| Number of Circuits | 2 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Rail-to-Rail |
| Package / Case | 8-MSOP, 8-TSSOP |
| Package / Case | 3 mm |
| Package / Case [custom] | 0.118 in |
| Slew Rate | 0.12 V/µs |
| Supplier Device Package | 8-MSOP |
| Voltage - Input Offset | 8 µV |
| Voltage - Supply Span (Max) [Max] | 5.5 V |
| Voltage - Supply Span (Min) [Min] | 1.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.37 | |
| 10 | $ 0.86 | |||
| 25 | $ 0.73 | |||
| 100 | $ 0.57 | |||
| 250 | $ 0.50 | |||
| 500 | $ 0.45 | |||
| 1000 | $ 0.42 | |||
| Digi-Reel® | 1 | $ 1.37 | ||
| 10 | $ 0.86 | |||
| 25 | $ 0.73 | |||
| 100 | $ 0.57 | |||
| 250 | $ 0.50 | |||
| 500 | $ 0.45 | |||
| 1000 | $ 0.42 | |||
| Tape & Reel (TR) | 2500 | $ 0.35 | ||
| 5000 | $ 0.32 | |||
| 12500 | $ 0.31 | |||
| 25000 | $ 0.30 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 0.98 | |
| 10 | $ 0.69 | |||
| 25 | $ 0.66 | |||
| 50 | $ 0.63 | |||
| 100 | $ 0.59 | |||
| 250 | $ 0.57 | |||
| 500 | $ 0.55 | |||
| 1000 | $ 0.53 | |||
Description
General part information
AS2333 Series
The AS2333 is dual CMOS operational amplifier designed with chopping stabilization technique. This product can provide ultra-low input offset voltage (8μV typical) and near zero-drift over time and temperature. This technique also eliminates 1/f noise and the crossover distortion present in most rail-to-rail input operational amplifiers. The high-precision, low quiescent current amplifier offers high-impedance inputs that have a common-mode range 100mV beyond the rails, and a rail-to-rail output that swings within 50mV of the rails. Single or dual supplies as low as 1.8V (±0.9V) and up to 5.5V (±2.75V) can be used.
Documents
Technical documentation and resources