Technical Specifications
Parameters and characteristics for this part
| Specification | VND5E012MYTR-E |
|---|---|
| Current - Output (Max) [Max] | 52 A |
| Fault Protection | Over Temperature, Current Limiting (Fixed), Over Voltage |
| Features | Auto Restart |
| Grade | Automotive |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 0.295 in |
| Package / Case | 36-PowerBFSOP |
| Package / Case [x] | 7.5 mm |
| Qualification | AEC-Q100 |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 11 mOhm |
| Supplier Device Package | PowerSSO-36 EPD |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 28 V |
| Voltage - Load [Min] | 4.5 V |
| Voltage - Supply (Vcc/Vdd) | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 5.03 | |
| Digi-Reel® | 1 | $ 5.03 | ||
| Tape & Reel (TR) | 1000 | $ 2.88 | ||
| 2000 | $ 2.81 | |||
| 3000 | $ 2.78 | |||
Description
General part information
VND5E012MY-E Series
The VND5E012MY-E is a double channel high-side driver manufactured in the STMicroelectronics®VIPower®M0-5 technology and housed in the tiny PowerSSO-36 package. The VND5E012MY-E is designed to drive 12 V automotive grounded loads delivering protection, diagnostics and easy 3 V and 5 V CMOS compatible interface with any microcontroller.
The device integrates advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off with auto restart and over-voltage active clamp. A dedicated analog current sense pin is associated with every output channel in order to provide Enhanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication and overtemperature indication.
The current sensing and diagnostic feedback of the whole device can be disabled by pulling the CS_DIS pin high to allow sharing of the external sense resistor with other similar devices.
Documents
Technical documentation and resources