LTC3602EFE#TRPBF

Active

Analog Devices

CONV DC-DC 4.5V TO 10V SYNCHRONOUS STEP DOWN SINGLE-OUT 0.6V TO 9.5V 2.5A 16-PIN TSSOP EP T/R

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsR526 Reliability Data Datasheet +1

LTC3602EFE#TRPBF

Active

Analog Devices

CONV DC-DC 4.5V TO 10V SYNCHRONOUS STEP DOWN SINGLE-OUT 0.6V TO 9.5V 2.5A 16-PIN TSSOP EP T/R

Deep-Dive with AI

DocumentsR526 Reliability Data Datasheet +1

Specifications Pricing Series Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	LTC3602EFE#TRPBF

Current - Output	2.5 A
Frequency - Switching	1 MHz
Function	Step-Down
Mounting Type	Surface Mount
Number of Outputs	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Configuration	Positive
Output Type	Adjustable
Package / Case	Exposed Pad, 16-TSSOP
Package / Case [custom]	0.173 "
Package / Case [custom]	4.4 mm
Supplier Device Package	16-TSSOP-EP
Synchronous Rectifier	True
Topology	Buck
Voltage - Input (Max) [Max]	10 V
Voltage - Input (Min) [Min]	4.5 V
Voltage - Output (Max)	9.5 V
Voltage - Output (Min/Fixed)	0.6 V

LTC3602 Series

2.5A, 10V, Monolithic Synchronous Step-Down Regulator

Part	Voltage - Input (Max) [Max]	Output Configuration	Voltage - Output (Min/Fixed)	Output Type	Package / Case [custom]	Package / Case	Package / Case [custom]	Current - Output	Topology	Function	Frequency - Switching	Number of Outputs	Voltage - Output (Max)	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Input (Min) [Min]	Mounting Type	Supplier Device Package
Analog Devices LTC3602IFE#TRPBF	10 V	Positive	0.6 V	Adjustable	0.173 "	16-TSSOP Exposed Pad	4.4 mm	2.5 A	Buck	Step-Down	1 MHz	1	9.5 V	85 °C	-40 °C	4.5 V	Surface Mount	16-TSSOP-EP
Analog Devices LTC3602EUF#TRPBF	10 V	Positive	0.6 V	Adjustable		20-WFQFN Exposed Pad		2.5 A	Buck	Step-Down	1 MHz	1	9.5 V	85 °C	-40 °C	4.5 V	Surface Mount	20-QFN (4x4)
Analog Devices LTC3602EFE#PBF	10 V	Positive	0.6 V	Adjustable	0.173 "	16-TSSOP Exposed Pad	4.4 mm	2.5 A	Buck	Step-Down	1 MHz	1	9.5 V	85 °C	-40 °C	4.5 V	Surface Mount	16-TSSOP-EP
Analog Devices LTC3602EFE#TRPBF	10 V	Positive	0.6 V	Adjustable	0.173 "	16-TSSOP Exposed Pad	4.4 mm	2.5 A	Buck	Step-Down	1 MHz	1	9.5 V	85 °C	-40 °C	4.5 V	Surface Mount	16-TSSOP-EP

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tape & Reel (TR)	2500	$ 6.13

Description

General part information

LTC3602 Series

The LTC3602 is a high efficiency, monolithic synchronous, step-down DC/DC converter utilizing a constant-frequency, current mode architecture. It operates from an input voltage range of 4.5V to 10V and provides an adjustable regulated output voltage from 0.6V to 9.5V while delivering up to 2.5A of output current. The internal synchronous power switch with 65mΩ on-resistance increases efficiency and eliminates the need for an external Schottky diode. The switching frequency can either be set by an external resistor or synchronized to an external clock. OPTI-LOOP®compensation allows the transient response to be optimized over a wide range of loads and output capacitors.The LTC3602 can be conﬁgured for either Burst Mode operation or forced continuous operation. Forced continuous operation reduces noise and RF interference, while Burst Mode operation provides the high efficiency at light loads. In Burst Mode operation, external control of the burst clamp level allows the output voltage ripple to be adjusted according to the requirements of the application.ApplicationsPoint-of-Load SuppliesPortable InstrumentsServer Backplane PowerBattery-Powered Devices

LTC3602EFE#TRPBF

Deep-Dive with AI

LTC3602EFE#TRPBF

Deep-Dive with AI

Technical Specifications

LTC3602 Series

Pricing

Description

LTC3602 Series

Documents

R526 Reliability Data

Datasheet

Tape and Reel Packaging

LTC3602 Series