
LTC3892IUH-2#TRPBF
Active60V LOW IQ, DUAL, 2-PHASE SYNCHRONOUS STEP-DOWN DC/DC CONTROLLER
Deep-Dive with AI
Search across all available documentation for this part.

LTC3892IUH-2#TRPBF
Active60V LOW IQ, DUAL, 2-PHASE SYNCHRONOUS STEP-DOWN DC/DC CONTROLLER
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LTC3892IUH-2#TRPBF |
|---|---|
| Clock Sync | False |
| Control Features | Power Good, Soft Start, Tracking, Frequency Control, Enable, Current Limit |
| Duty Cycle (Max) [Max] | 99 % |
| Frequency - Switching [Max] | 535 kHz, 835 kHz |
| Frequency - Switching [Min] | 350 kHz, 105 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Phases | 2 |
| Output Type | Transistor Driver |
| Supplier Device Package | 32-QFN (5x5) |
| Synchronous Rectifier | True |
| Topology | Buck |
| Voltage - Supply (Vcc/Vdd) [Max] | 60 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 2500 | $ 8.24 | |
Description
General part information
LTC3892 Series
The LTC3892/LTC3892-1/LTC3892-2 is a high performance dual step-down DC/DC switching regulator controller that drives all N-channel synchronous power MOSFET stages. Power loss and noise are minimized by operating the two controller output stages out-of-phase.The gate drive voltage can be programmed from 5V to 10V to allow the use of logic or standard-level FETs and to maximize efficiency. Internal switches in the top gate drivers eliminate the need for external bootstrap diodes.A wide 4.5V to 60V input supply range encompasses a wide range of intermediate bus voltages and battery chemistries. Output voltages up to 99% of VINcan be regulated. OPTI-LOOP®compensation allows the transient response and loop stability to be optimized over a wide range of output capacitance and ESR values.The 29μA no-load quiescent current extends operating run time in battery powered systems.ApplicationsAutomotive and Industrial Power SystemsDistributed DC Power SystemsHigh Voltage Battery Operated Systems
Documents
Technical documentation and resources