LNK584DG-TL
ActiveAC/DC CONVERTER, FLYBACK, 85 VAC TO 265 VAC IN, 3 W, SOIC-8
Deep-Dive with AI
Search across all available documentation for this part.
LNK584DG-TL
ActiveAC/DC CONVERTER, FLYBACK, 85 VAC TO 265 VAC IN, 3 W, SOIC-8
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LNK584DG-TL |
|---|---|
| Duty Cycle | 63 % |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit, Current Limiting, Open Loop |
| Frequency - Switching | 100 kHz |
| Internal Switch(s) | True |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Isolation | Either |
| Package / Case | 8-SOIC |
| Package / Case | 0.154 in |
| Package / Case [custom] | 7 |
| Package / Case [custom] | 3.9 mm |
| Power (Watts) | 3 W |
| Supplier Device Package | SO-8C |
| Topology | Flyback |
| Voltage - Breakdown | 700 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
Description
General part information
LNK584 Series
LinkZero™-AX combines extremely low standby/power-down energy use with the industry’s lowest component count standby supply solution. Below 3mW at 230VAC in power-down (PD) mode meets IEC 62301 definition of zero power consumption and is immeasurable on most power meters. LinkZero-AX is set into power-down mode using an external signal to pull the FEEDBACK pin high for 2.5ms. Such an external signal can be generated by a system micro controller or infrared controller. In power-down mode the BYPASS pin remains regulated allowing the LinkZero-AX to be woken up with a reset pulse to pull the BYPASS pin below a reset threshold (1.5V). Ultra low system consumption is therefore achieved without needing to disconnect the input voltage with a relay. Typically used in ultra low consumption isolated or non-isolated standby and auxiliary supplies.
Documents
Technical documentation and resources