Zenode.ai Logo
Beta
K
UCC21521CDWR - 16-SOIC

UCC21521CDWR

Active
Texas Instruments

5.7KVRMS, 4A/6A DUAL-CHANNEL ISOLATED GATE DRIVER WITH DUAL INPUT, ENABLE, 8V UVLO & LGA PACK

Deep-Dive with AI

Search across all available documentation for this part.

UCC21521CDWR - 16-SOIC

UCC21521CDWR

Active
Texas Instruments

5.7KVRMS, 4A/6A DUAL-CHANNEL ISOLATED GATE DRIVER WITH DUAL INPUT, ENABLE, 8V UVLO & LGA PACK

Technical Specifications

Parameters and characteristics for this part

SpecificationUCC21521CDWR
Common Mode Transient Immunity (Min) [Min]100 V/ns
Current - Output High, Low4 A, 6 A
Mounting TypeSurface Mount
Number of Channels [custom]2
Operating Temperature [Max]125 °C
Operating Temperature [Min]-40 °C
Package / Case16-SOIC
Package / Case [x]0.295 in
Package / Case [y]7.5 mm
Propagation Delay tpLH / tpHL (Max) [Max]30 ns
Pulse Width Distortion (Max) [Max]6 ns
Rise / Fall Time (Typ) [custom]7 ns
Rise / Fall Time (Typ) [custom]6 ns
Supplier Device Package16-SOIC
TechnologyCapacitive Coupling
Voltage - Isolation5700 Vrms
Voltage - Output Supply [Max]18 V
Voltage - Output Supply [Min]3 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
DigikeyCut Tape (CT) 1$ 4.36
10$ 3.92
25$ 3.71
100$ 3.21
250$ 3.05
500$ 2.73
1000$ 2.31
Digi-Reel® 1$ 4.36
10$ 3.92
25$ 3.71
100$ 3.21
250$ 3.05
500$ 2.73
1000$ 2.31
Tape & Reel (TR) 2000$ 2.19
Texas InstrumentsLARGE T&R 1$ 3.29
100$ 2.88
250$ 2.02
1000$ 1.63

Description

General part information

UCC21521 Series

The UCC21521 is an isolated dual-channel gate driver with 4-A source and 6-A sink peak current. It is designed to drive power MOSFETs, IGBTs, and SiC MOSFETs up to 5-MHz with best-in-class propagation delay and pulse-width distortion.

The input side is isolated from the two output drivers by a 5.7-kVRMSreinforced isolation barrier, with a minimum of 100-V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two secondary-side drivers allows a working voltage of up to 1500 VDC.

Every driver can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver with programmable dead time (DT). The EN pin pulled low shuts down both outputs simultaneously and allows for normal operation when left open or pulled high. As a fail-safe measure, primary-side logic failures force both outputs low.