XTR300AIRGWT
ActiveINDUSTRIAL ANALOG CURRENT/VOLTAGE OUTPUT DRIVER
Deep-Dive with AI
Search across all available documentation for this part.
XTR300AIRGWT
ActiveINDUSTRIAL ANALOG CURRENT/VOLTAGE OUTPUT DRIVER
Technical Specifications
Parameters and characteristics for this part
| Specification | XTR300AIRGWT |
|---|---|
| Input Type | Voltage |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -55 °C |
| Output Type | Current |
| Package / Case | 20-VQFN Exposed Pad |
| Supplier Device Package | 20-VQFN (5x5) |
| Type | Output Driver |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 5.92 | |
| 10 | $ 5.32 | |||
| 25 | $ 5.03 | |||
| 100 | $ 4.36 | |||
| Digi-Reel® | 1 | $ 5.92 | ||
| 10 | $ 5.32 | |||
| 25 | $ 5.03 | |||
| 100 | $ 4.36 | |||
| Tape & Reel (TR) | 250 | $ 4.13 | ||
| 500 | $ 3.71 | |||
| 1250 | $ 3.13 | |||
| 2500 | $ 2.97 | |||
| Texas Instruments | SMALL T&R | 1 | $ 4.47 | |
| 100 | $ 3.92 | |||
| 250 | $ 2.75 | |||
| 1000 | $ 2.21 | |||
Description
General part information
XTR300 Series
The XTR300 is a complete output driver for industrial and process control applications. The output can be configured as current or voltage by the digital I/V select pin. No external shunt resistor is required. Only external gain-setting resistors and a loop compensation capacitor are required.
The separate driver and receiver channels provide flexibility. The Instrumentation Amplifier (IA) can be used for remote voltage sense or as a high-voltage, high-impedance measurement channel. In voltage output mode, a copy of the output current is provided, allowing calculation of load resistance.
The digital output selection capability, together with the error flags and monitor pins, make remote configuration and troubleshooting possible. Fault conditions on the output and on the IA input as well as over-temperature conditions are indicated by the error flags. The monitoring pins provide continuous feedback about load power or impedance. For additional protection, the maximum output current is limited and thermal protection is provided.
Documents
Technical documentation and resources