
MUX08FQ
Active8-CHANNEL JFET ANALOG MULTIPLEXERS (OVERVOLTAGE & POWER SUPPLY LOSS PROTECTED)
Deep-Dive with AI
Search across all available documentation for this part.

MUX08FQ
Active8-CHANNEL JFET ANALOG MULTIPLEXERS (OVERVOLTAGE & POWER SUPPLY LOSS PROTECTED)
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MUX08FQ |
|---|---|
| Channel Capacitance (CS(off), CD(off)) [custom] | 2.5 pF |
| Channel Capacitance (CS(off), CD(off)) [custom] | 7 pF |
| Channel-to-Channel Matching (ΔRon) | 21 Ohm |
| Crosstalk | -70 dB |
| Current - Leakage (IS(off)) (Max) | 1 nA |
| Mounting Type | Through Hole |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Number of Circuits | 1 |
| On-State Resistance (Max) [Max] | 300 Ohm |
| Operating Temperature [Max] | 85 C |
| Operating Temperature [Min] | -25 °C |
| Package / Case | 7.62 mm, 0.3 in |
| Package / Case | 16-CDIP |
| Supplier Device Package | 16-CERDIP |
| Switch Time (Ton, Toff) (Max) [custom] | 2 µs |
| Switch Time (Ton, Toff) (Max) [custom] | 0.0004 s |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
Description
General part information
5962-8771602 Series
The MUX-08 is a monolithic eight-channel analog multiplexer which connects a single output to one of the eight analog inputs depending upon the state of a 3-bit binary address.The MUX-24 is a monolithic four-channel differential analog multiplexer configured in a double pole, four position (plus OFF) electronic switch array. A two-bit binary input address connects a pair of independent analog inputs from each four channel input section to the corresponding pair of independent analog outputs.All switches in the MUX-08/MUX-24 are turned OFF by applying logic "0" to the ENABLE pin, thereby providing a package select function.Fabricated with Precision Monolithics' high performance Bipolar-JFET technology, these devices offer low, constant "ON" resistance, low leakage currents and fast settling time with low crosstalk to satisfy a wide variety of applications.These multiplexors do not suffer from latch-up or static charge blow-out problems associated with similar CMOS parts. The digital inputs are designed to operate form both TTL and CMOS levels while always providing a definite break-before-make action without the need for external pull-up resistors over the full operating temperature range.