UCC21530DWK

LTB

Texas Instruments

5.7KVRMS, 4A/6A DUAL-CHANNEL ISOLATED GATE DRIVER WITH EN & DT PINS IN DWK PKG FOR IGBT/SIC F

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsVDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. W)CSA Product Certificate (Rev. A)+7

UCC21530DWK

LTB

Texas Instruments

5.7KVRMS, 4A/6A DUAL-CHANNEL ISOLATED GATE DRIVER WITH EN & DT PINS IN DWK PKG FOR IGBT/SIC F

Deep-Dive with AI

DocumentsVDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. W)CSA Product Certificate (Rev. A)+7

Specifications Pricing Series Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	UCC21530DWK

Channel Type	Independent
Current - Peak Output (Source, Sink) [custom]	6 A
Current - Peak Output (Source, Sink) [custom]	4 A
Driven Configuration	Half-Bridge
Input Type	CMOS/TTL
Logic Voltage - VIL, VIH [custom]	1.2 V
Logic Voltage - VIL, VIH [custom]	1.6 V
Mounting Type	Surface Mount
Number of Drivers	2
Operating Temperature [Max]	130 °C
Operating Temperature [Min]	-40 °C
Package / Case	0.295 in
Package / Case	14-SOIC
Package / Case	7.5 mm
Rise / Fall Time (Typ) [custom]	7 ns
Rise / Fall Time (Typ) [custom]	6 ns
Voltage - Supply [Max]	18 V
Voltage - Supply [Min]	3 V

UCC21530-Q1 Series

Automotive, 4A, 6A, 5.7kVRMS, isolated dual-channel gate driver with EN and DT pins for IGBT/SiC

Part	Current - Peak Output (Source, Sink) [custom]	Current - Peak Output (Source, Sink) [custom]	Package / Case	Package / Case	Package / Case	Qualification	Mounting Type	Driven Configuration	Channel Type	Voltage - Supply [Max]	Voltage - Supply [Min]	Logic Voltage - VIL, VIH [custom]	Logic Voltage - VIL, VIH [custom]	Operating Temperature [Min]	Operating Temperature [Max]	Input Type	Number of Drivers	Grade	Rise / Fall Time (Typ) [custom]	Rise / Fall Time (Typ) [custom]	Voltage - Output Supply [Max]	Voltage - Output Supply [Min]	Number of Channels [custom]	Current - Output High, Low	Propagation Delay tpLH / tpHL (Max) [Max]	Pulse Width Distortion (Max) [Max]	Technology	Common Mode Transient Immunity (Min) [Min]	Approval Agency	Voltage - Isolation	Current - Peak Output
Texas Instruments UCC21530QDWKRQ1	6 A	4 A	0.295 in	14-SOIC	7.5 mm	AEC-Q100	Surface Mount	Half-Bridge	Independent	18 V	3 V	1.2 V	1.6 V	-40 °C	130 °C	CMOS/TTL	2	Automotive	7 ns	6 ns
Texas Instruments UCC21530BQDWKRQ1			0.295 in	14-SOIC	7.5 mm	AEC-Q100	Surface Mount							-40 °C	125 °C			Automotive	7 ns	6 ns	25 V	14.7 V	2	4 A 6 A	30 ns	6 ns	Capacitive Coupling	100 V/ns	CQC CSA UL VDE	5700 Vrms	4 A 6 A
Texas Instruments UCC21530DWK	6 A	4 A	0.295 in	14-SOIC	7.5 mm		Surface Mount	Half-Bridge	Independent	18 V	3 V	1.2 V	1.6 V	-40 °C	130 °C	CMOS/TTL	2		7 ns	6 ns
Texas Instruments UCC21530DWKR	6 A	4 A	0.295 in	14-SOIC	7.5 mm		Surface Mount	Half-Bridge	Independent	18 V	3 V	1.2 V	1.6 V	-40 °C	130 °C	CMOS/TTL	2		7 ns	6 ns
Texas Instruments UCC21530QDWKQ1	6 A	4 A	0.295 in	14-SOIC	7.5 mm	AEC-Q100	Surface Mount	Half-Bridge	Independent	18 V	3 V	1.2 V	1.6 V	-40 °C	130 °C	CMOS/TTL	2	Automotive	7 ns	6 ns

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 7.88
		10	$ 5.40
		25	$ 4.75
		100	$ 4.04
		250	$ 3.69
		500	$ 3.48
		1000	$ 3.30
		2500	$ 3.15
Texas Instruments	TUBE	1	$ 5.66
		100	$ 4.96
		250	$ 3.48
		1000	$ 2.80

Description

General part information

UCC21530-Q1 Series

The UCC21530-Q1 is an isolated dual-channel gate driver with 4A source and 6A sink peak current. It is designed to drive IGBTs, Si MOSFETs, and SiC MOSFETs up to 5MHz.

The input side is isolated from the two output drivers by a 5.7kVRMS reinforced isolation barrier, with a minimum of 125V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two secondary-side drivers allows a working voltage of up to 1850V.

This device can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver with programmable dead time (DT). The EN pin pulled low shuts down both outputs simultaneously and allows for normal operation when left open or pulled high. As a fail-safe measure, primary-side logic failures force both outputs low.

Documents

Technical documentation and resources

Using the UCC21520EVM-286, UCC21521CEVM-286, and UCC21530EVM286 User's Guide (Rev. C)

EVM User's guide

UCC21530 4A, 6A, 5.7kVRMS Isolated Dual-Channel Gate Driver With 3.3mm Channel-to-Channel Spacing datasheet (Rev. D)

Data sheet

UL Certification E181974 Vol 4. Sec 7 (Rev. C)

Certificate

The Use and Benefits of Ferrite Beads in Gate Drive Circuits

Application brief

Designing highly efficient, powerful and fast EV charging stations

Technical article

UCC21530DWK

Deep-Dive with AI

UCC21530DWK

Deep-Dive with AI

Technical Specifications

UCC21530-Q1 Series

Pricing

Description

UCC21530-Q1 Series

Documents

VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. W)

CSA Product Certificate (Rev. A)

UCC215xx CQC Certificate of Product Certification

Impact of Narrow Pulse Widths in Gate Driver Circuits (Rev. A)

Using the UCC21520EVM-286, UCC21521CEVM-286, and UCC21530EVM286 User's Guide (Rev. C)

UCC21530 4A, 6A, 5.7kVRMS Isolated Dual-Channel Gate Driver With 3.3mm Channel-to-Channel Spacing datasheet (Rev. D)

UL Certification E181974 Vol 4. Sec 7 (Rev. C)

The Use and Benefits of Ferrite Beads in Gate Drive Circuits

Designing highly efficient, powerful and fast EV charging stations

UCC21530-Q1 Series