74AC11257PW
ActiveQUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
74AC11257PW
ActiveQUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | 74AC11257PW |
|---|---|
| Circuit [custom] | 4 |
| Circuit [custom] | 2:1 |
| Current - Output High, Low | 24 mA |
| Independent Circuits | 1 |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 20-TSSOP |
| Package / Case [x] | 0.173 in |
| Package / Case [y] | 4.4 mm |
| Supplier Device Package | 20-TSSOP |
| Type | Multiplexer |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 3 V |
| Voltage Supply Source | Dual Supply |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 3.84 | |
| 10 | $ 3.45 | |||
| 70 | $ 3.26 | |||
| 140 | $ 2.83 | |||
| 280 | $ 2.68 | |||
| 560 | $ 2.41 | |||
| 1050 | $ 2.03 | |||
| 2520 | $ 1.93 | |||
| 5040 | $ 1.86 | |||
| Texas Instruments | TUBE | 1 | $ 3.33 | |
| 100 | $ 2.92 | |||
| 250 | $ 2.05 | |||
| 1000 | $ 1.65 | |||
Description
General part information
74AC11257 Series
This device is designed to multiplex signals from 4-bit data sources to four output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (OE\) input is at a high logic level.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is designed to multiplex signals from 4-bit data sources to four output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (OE\) input is at a high logic level.
Documents
Technical documentation and resources