X9313WPZ-3

Obsolete

Renesas Electronics Corporation

DIGITALLY CONTROLLED POTENTIOMETER (XDCP™), LINEAR, 32 TAPS, 3 WIRE INTERFACE, TERMINAL VOLTAGES ± VCC

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet X9313 Datasheet

X9313WPZ-3

Obsolete

Renesas Electronics Corporation

DIGITALLY CONTROLLED POTENTIOMETER (XDCP™), LINEAR, 32 TAPS, 3 WIRE INTERFACE, TERMINAL VOLTAGES ± VCC

Deep-Dive with AI

DocumentsDatasheet X9313 Datasheet

Specifications Pricing Series Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	X9313WPZ-3

Configuration	Potentiometer
Interface	Up/Down
Memory Type	Non-Volatile
Mounting Type	Through Hole
Number of Circuits	1
Operating Temperature [Max]	70 °C
Operating Temperature [Min]	0 °C
Package / Case	0.3 in
Package / Case	8-DIP
Package / Case	7.62 mm
Resistance - Wiper (Ohms) (Typ)	40 Ohms
Resistance (Ohms)	10k
Supplier Device Package	8-PDIP
Taper	Linear
Temperature Coefficient (Typ)	300 ppm/°C
Tolerance	20 %
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	3 V

X9313 Series

Digitally Controlled Potentiometer (XDCP™), Linear, 32 Taps, 3 Wire Interface, Terminal Voltages ± VCC

Part	Supplier Device Package	Memory Type	Interface	Voltage - Supply [Max]	Voltage - Supply [Min]	Resistance - Wiper (Ohms) (Typ)	Tolerance	Number of Circuits	Configuration	Mounting Type	Package / Case	Package / Case [y]	Package / Case [x]	Taper	Resistance (Ohms)	Temperature Coefficient (Typ)	Operating Temperature [Max]	Operating Temperature [Min]	Resistance (Ohms)	Package / Case	Package / Case	Package / Case [custom]
Renesas Electronics Corporation X9313ZSZ-3	8-SOIC	Non-Volatile	Up/Down	5.5 V	3 V	40 Ohms	20 %	1	Potentiometer	Surface Mount	8-SOIC	3.9 mm	0.154 in	Linear	1 kOhms	300 ppm/°C	70 °C	0 °C
Renesas Electronics Corporation X9313WPZ-3	8-PDIP	Non-Volatile	Up/Down	5.5 V	3 V	40 Ohms	20 %	1	Potentiometer	Through Hole	8-DIP			Linear		300 ppm/°C	70 °C	0 °C	10k	0.3 in	7.62 mm
Renesas Electronics Corporation X9313UMIZ	8-MSOP	Non-Volatile	Up/Down			40 Ohms	20 %	1	Potentiometer	Surface Mount	8-MSOP 8-TSSOP			Linear	50 kOhms	300 ppm/°C	85 °C	-40 °C		3 mm		0.118 in
Renesas Electronics Corporation X9313WMIZ-3T1	8-MSOP	Non-Volatile	Up/Down	5.5 V	3 V	40 Ohms	20 %	1	Potentiometer	Surface Mount	8-MSOP 8-TSSOP			Linear		300 ppm/°C	85 °C	-40 °C	10k	3 mm		0.118 in
Renesas Electronics Corporation X9313WSZ-3	8-SOIC	Non-Volatile	Up/Down	5.5 V	3 V	40 Ohms	20 %	1	Potentiometer	Surface Mount	8-SOIC	3.9 mm	0.154 in	Linear		300 ppm/°C	70 °C	0 °C	10k
Renesas Electronics Corporation X9313WMIT1	8-MSOP	Non-Volatile	Up/Down			40 Ohms	20 %	1	Potentiometer	Surface Mount	8-MSOP 8-TSSOP			Linear		300 ppm/°C	85 °C	-40 °C	10k	3 mm		0.118 in
Renesas Electronics Corporation X9313USIT1	8-SOIC	Non-Volatile	Up/Down			40 Ohms	20 %	1	Potentiometer	Surface Mount	8-SOIC	3.9 mm	0.154 in	Linear	50 kOhms	300 ppm/°C	85 °C	-40 °C
Renesas Electronics Corporation X9313ZST2	8-SOIC	Non-Volatile	Up/Down			40 Ohms	20 %	1	Potentiometer	Surface Mount	8-SOIC	3.9 mm	0.154 in	Linear	1 kOhms	300 ppm/°C	70 °C	0 °C
Renesas Electronics Corporation X9313WMIZ	8-MSOP	Non-Volatile	Up/Down			40 Ohms	20 %	1	Potentiometer	Surface Mount	8-MSOP 8-TSSOP			Linear		300 ppm/°C	85 °C	-40 °C	10k	3 mm		0.118 in
Renesas Electronics Corporation X9313WMIZT1	8-MSOP	Non-Volatile	Up/Down			40 Ohms	20 %	1	Potentiometer	Surface Mount	8-MSOP 8-TSSOP			Linear		300 ppm/°C	85 °C	-40 °C	10k	3 mm		0.118 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Description

General part information

X9313 Series

The Intersil X9313 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including: