
X9015US8IZ-2.7T1
ObsoleteLOW NOISE, LOW POWER, VOLATILE; SINGLE DIGITALLY CONTROLLED (XDCP™) POTENTIOMETER
Deep-Dive with AI
Search across all available documentation for this part.

X9015US8IZ-2.7T1
ObsoleteLOW NOISE, LOW POWER, VOLATILE; SINGLE DIGITALLY CONTROLLED (XDCP™) POTENTIOMETER
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | X9015US8IZ-2.7T1 |
|---|---|
| Configuration | Potentiometer |
| Interface | Up/Down |
| Memory Type | Volatile |
| Mounting Type | Surface Mount |
| Number of Circuits | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Resistance - Wiper (Ohms) (Typ) | 400 Ohms |
| Resistance (Ohms) | 50 kOhms |
| Supplier Device Package | 8-SOIC |
| Taper | Linear |
| Temperature Coefficient (Typ) | 300 ppm/°C |
| Tolerance | 20 % |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
Description
General part information
X9015 Series
The Intersil X9015 is a 32 tap potentiometer that is volatile. The device consists of a string of 31 resistors that can be programmed to connect the RW/VWwiper output with any of the nodes between the connecting resistors. The connection point of the wiper is determined by information communicated to the device on the 3-wire port. The 3-wire port changes the tap position by a falling edge on the increment pin. The direction the wiper moves is determined by the state of the up/down pin. The wiper position at power up is Tap #15. The X9015 can be used in a wide variety of applications that require a digitally controlled variable resistor to set analog values.
Documents
Technical documentation and resources