VNQ5050KTR-E
ActivePOWER LOAD DRIVER, HIGH SIDE, CURRENT SENSE, 4 OUTPUTS, 0.050 OHM, 41 V SUPP, 19 A, POWERSSO-24
Deep-Dive with AI
Search across all available documentation for this part.
VNQ5050KTR-E
ActivePOWER LOAD DRIVER, HIGH SIDE, CURRENT SENSE, 4 OUTPUTS, 0.050 OHM, 41 V SUPP, 19 A, POWERSSO-24
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | VNQ5050KTR-E |
|---|---|
| Current - Output (Max) [Max] | 13.5 A |
| Fault Protection | Over Temperature, Current Limiting (Fixed), Over Voltage |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 4 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | Exposed Pad, 24-SOP |
| Package / Case [custom] | 0.295 in |
| Package / Case [custom] | 7.5 mm |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 50 mOhm |
| Supplier Device Package | PowerSSO-24™ |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 36 V |
| Voltage - Load [Min] | 4.5 V |
| Voltage - Supply (Vcc/Vdd) | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 6.11 | |
| 10 | $ 5.49 | |||
| 25 | $ 5.19 | |||
| 100 | $ 4.49 | |||
| 250 | $ 4.26 | |||
| 500 | $ 3.83 | |||
| Digi-Reel® | 1 | $ 6.11 | ||
| 10 | $ 5.49 | |||
| 25 | $ 5.19 | |||
| 100 | $ 4.49 | |||
| 250 | $ 4.26 | |||
| 500 | $ 3.83 | |||
| Tape & Reel (TR) | 1000 | $ 3.23 | ||
| 2000 | $ 3.07 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 5.51 | |
| 10 | $ 4.21 | |||
| 25 | $ 3.89 | |||
| 50 | $ 3.71 | |||
| 100 | $ 3.53 | |||
| 250 | $ 3.36 | |||
| 500 | $ 3.26 | |||
Description
General part information
VNQ5050K-E Series
The VNQ5050K-E is a monolithic device made using STMicroelectronics VIPower M0-5 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).
The device detecs open load condition both in on and off state, when STAT_DIS is left open or driven low. Output shorted to VCCis detected in the off state.
When STAT_DIS is driven high, the STATUS pin is in a high impedance condition.
Documents
Technical documentation and resources