LTC3603EUF#TRPBF
ActiveCONV DC-DC 4.5V TO 15V SYNCHRONOUS STEP DOWN SINGLE-OUT 0.6V TO 14.5V 2.5A 20-PIN QFN EP T/R
Deep-Dive with AI
Search across all available documentation for this part.
LTC3603EUF#TRPBF
ActiveCONV DC-DC 4.5V TO 15V SYNCHRONOUS STEP DOWN SINGLE-OUT 0.6V TO 14.5V 2.5A 20-PIN QFN EP T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LTC3603EUF#TRPBF |
|---|---|
| Current - Output | 2.5 A |
| Frequency - Switching | 1 MHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | 20-WFQFN Exposed Pad |
| Supplier Device Package | 20-QFN (4x4) |
| Synchronous Rectifier | True |
| Topology | Buck |
| Voltage - Input (Max) [Max] | 15 V |
| Voltage - Input (Min) [Min] | 4.5 V |
| Voltage - Output (Max) [Max] | 14.5 V |
| Voltage - Output (Min/Fixed) | 0.6 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 10.99 | |
| 10 | $ 7.68 | |||
| 25 | $ 6.83 | |||
| 100 | $ 5.88 | |||
| 250 | $ 5.42 | |||
| 500 | $ 5.14 | |||
| 1000 | $ 4.90 | |||
| Digi-Reel® | 1 | $ 10.99 | ||
| 10 | $ 7.68 | |||
| 25 | $ 6.83 | |||
| 100 | $ 5.88 | |||
| 250 | $ 5.42 | |||
| 500 | $ 5.14 | |||
| 1000 | $ 4.90 | |||
| Tape & Reel (TR) | 2500 | $ 4.86 | ||
Description
General part information
LTC3603 Series
The LTC3603 is a high efficiency, monolithic synchronous step-down DC/DC converter utilizing a constant-frequency, current mode architecture. It operates from an input voltage range of 4.5V to 15V and provides an adjustable regulated output voltage from 0.6V to 14.5V while delivering up to 2.5A of output current. The internal synchronous power switch with 45mΩ on-resistance increases efficiency and eliminates the need for an external Schottky diode. The switching frequency can either be set by an external resistor or synchronized to an external clock. OPTI-LOOP®compensation allows the transient response to be optimized over a wide range of loads and output capacitors.The LTC3603 can be configured for either Burst Mode operation or forced continuous operation. Forced continuous operation reduces noise and RF interference, while Burst Mode operation provides the highest efficiency at light loads. In Burst Mode operation, external control of the burst clamp level allows the output voltage ripple to be adjusted according to the requirements of the application.ApplicationsPoint-of-Load SuppliesPortable InstrumentsCommunications Infrastructure
Documents
Technical documentation and resources