
LTC3882BIUJ
ObsoleteIC POWER MANAGEMENT
Deep-Dive with AI
Search across all available documentation for this part.

LTC3882BIUJ
ObsoleteIC POWER MANAGEMENT
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LTC3882BIUJ |
|---|---|
| Clock Sync | True |
| Control Features | Phase Control, Enable |
| Duty Cycle (Max) [Max] | 87.5 % |
| Frequency - Switching | 500 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Phases | 2 |
| Output Type | PWM Signal |
| Package / Case | 40-WFQFN Exposed Pad |
| Serial Interfaces | PMBus, I2C |
| Supplier Device Package | 40-QFN (6x6) |
| Synchronous Rectifier | False |
| Topology | Buck |
| Voltage - Supply (Vcc/Vdd) [Max] | 13.8 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
Description
General part information
LTC3882-1LTC3882-2 Series
The LTC3882-1/LTC3882-2 is a dual, PolyPhase DC/DC synchronous step-down switching regulator controller with PMBus compliant serial interface. It uses a constant frequency, leading-edge modulation, voltage mode architecture for excellent transient response and output regulation. Each PWM channel can produce output voltages from 0.1V to 5.25V using a wide range of 3.3V compatible power stages, including power blocks, DrMOS or discrete FET drivers. Up to four LTC3882-1 devices can operate in parallel for 2-, 3-, 4-, 6- or 8-phase operation.System configuration and monitoring is supported by the LTpowerPlay™software tool. The LTC3882-1/LTC3882-2 serial interface can read back input voltage, output voltage and current, temperature and fault status. Most operating parameters can be set via the digital interface or stored in internal EEPROM for use at power up. Switching frequency and phase, output voltage and device address can also be set using external configuration resistors.PWM Enable OutputTG/BG ControlHW Write ProtectDedicated PGOODDifferential VOUTSenseMax PWM FrequencyLTC3882YesYesYesNoVOUT0Only1.25MHzLTC3882-1NoNoNoYesVOUT0& VOUT11.25MHzLTC3882-2NoNoNoYesVOUT0& VOUT12.5MHzAPPLICATIONSHigh Current Distributed Power SystemsServers, Network and Storage EquipmentIntelligent Energy Efficient Power Regulation
Documents
Technical documentation and resources