Zenode.ai Logo
Beta
K
UC3825DWG4 - 16-SOIC

UC3825DWG4

Unknown
Texas Instruments

IC REG CTRLR MULT TOP 16SOIC

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet
UC3825DWG4 - 16-SOIC

UC3825DWG4

Unknown
Texas Instruments

IC REG CTRLR MULT TOP 16SOIC

Deep-Dive with AI

DocumentsDatasheet

Technical Specifications

Parameters and characteristics for this part

SpecificationUC3825DWG4
Clock SyncFalse
Control FeaturesFrequency Control, Soft Start, Enable, Current Limit, Ramp
Frequency - Switching [Max]460 kHz
Frequency - Switching [Min]340 kHz
FunctionStep-Up, Step-Up/Step-Down, Step-Down
Mounting TypeSurface Mount
Number of Outputs2
Operating Temperature [Max]70 °C
Operating Temperature [Min]0 °C
Output ConfigurationPositive
Output Phases1
Output TypeTransistor Driver
Package / Case16-SOIC
Package / Case [x]0.295 in
Package / Case [y]7.5 mm
Supplier Device Package16-SOIC
Synchronous RectifierFalse
TopologyForward Converter, Flyback, Push-Pull, Half-Bridge, Full-Bridge, Boost, Buck
Voltage - Supply (Vcc/Vdd) [Max]30 V
Voltage - Supply (Vcc/Vdd) [Min]8.4 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
DigikeyTube 120$ 4.17

Description

General part information

UC3825A Series

The UC1825 family of PWM control ICs is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance.

These devices feature totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.

Documents

Technical documentation and resources