AP25810L Series

USB TYPE-C DFP CONTROLLER AND POWER SWITCH WITH LOAD DETECTION

Catalog

USB TYPE-C DFP CONTROLLER AND POWER SWITCH WITH LOAD DETECTION

Part	Qualification	Applications	Package / Case	Voltage - Supply [Min]	Voltage - Supply [Max]	Supplier Device Package	Grade	Operating Temperature [Max]	Operating Temperature [Min]	Current - Supply	Mounting Type
Diodes Inc AP25810LDFZ20-13	AEC-Q100	Type-C Controller USB	20-WFQFN Exposed Pad	4.5 V	6.5 V	W-QFN3040-20 Type A1	Automotive	85 °C	-40 °C	160 µA	Surface Mount

Catalog

USB TYPE-C DFP CONTROLLER AND POWER SWITCH WITH LOAD DETECTION

Key Features

• USB-C Rev. 2.0 Compliant DFP Controller

• Connector Attach or Detach Detection

• STD, 1.5A or 3A Capability Advertisement on CC

• Super-Speed Polarity Determination

• VBUSApplication and Discharge

• VCONNApplication to Electronically Marked Cable

• Audio and Debug Accessory Identification

• 7μA (typ) IDDQ When Port Is Unattached

• Three Input Supply OptionsIN1: USB Charging SupplyIN2: VCONNSupplyAUX: Device Power Supply

• IN1: USB Charging Supply

• IN2: VCONNSupply

• AUX: Device Power Supply

• Power Wake Supports Low Power in SystemHibernate (S4) and OFF (S5) Power States

• Hibernate (S4) and OFF (S5) Power States

• 30mΩ (typ) High-Side MOSFET

• Programmable 1.7A or 3.4A ILIM (±7.1%)

• Port Power Management Enables PowerResource Optimization Across Multiple Ports

• Resource Optimization Across Multiple Ports

• Transient Protection for CC1/CC2 Lines:IEC 61000-4-2 Contact Discharge ±8 kVIEC 61000-4-2 Air Gap Discharge ±15 kV

• IEC 61000-4-2 Contact Discharge ±8 kV

• IEC 61000-4-2 Air Gap Discharge ±15 kV

• Thermally Efficient Low Profile Package

• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

• Halogen- and Antimony-Free. "Green" Device (Note 3)

• For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), pleasecontact usor your local Diodes representative.https://www.diodes.com/quality/product-definitions/

Description

The AP25810L device is a USB-C® downstream-facing port (DFP) controller with an integrated 3A rated USB power switch. The AP25810L device monitors the Type-C configuration channel (CC) lines to determine when a USB device is attached. If an upstream-facing port (UFP) device is attached, the AP25810L device applies power to the VBUSand communicates the selectable VBUScurrent-sourcing capability to the UFP via the pass-through CC line. If the UFP is attached using an electronically marked cable, the AP25810L device also applies VCONNpower to the cable CC pin. The AP25810L device also identifies when Type-C audio or debug accessories are attached. The AP25810L device draws less than 0.7μA (typ) when no device is attached. Additional system power saving is achievable in the S4 and S5 system power states by using the output to disable the high-power 5V supply when no UFP is attached. In this mode, the device is capable of running from an auxiliary supply (AUX), which can be a lower-voltage supply (3.3V), typically powering the system μC in low-power states (S4 and S5). The AP25810L 30mΩ power switch has two selectable fixed-current limits that align with the Type‑C current levels. The output signals when the switch is in an overcurrent or overtemperature condition. The output controls power management to multiple high-current Type-C ports in an environment where all ports cannot simultaneously provide high current (3A). The AP25810L is available in a standard Green W-QFN3040-20 package with exposed PAD for improved thermal performance, and is RoHS-compliancy.