Zenode.ai Logo
Beta
K

LTC3890-1 Series

60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller

Manufacturer: Analog Devices

Catalog

60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller

Key Features

• Wide VINRange: 4V to 60V (65V Abs Max)
• Low Operating IQ: 50µA (One Channel On)
• Wide Output Voltage Range: 0.8V ≤ VOUT≤ 24V
• RSENSEor DCR Current Sensing
• Out-of-Phase Controllers Reduce Required Input Capacitance and Power Supply Induced Noise
• Phase-Lockable Frequency (75kHz to 850kHz)
• Programmable Fixed Frequency (50kHz to 900kHz)
• Selectable Continuous, Pulse-Skipping or Low Ripple Burst Mode®Operation at Light Loads
• Selectable Current Limit
• Very Low Dropout Operation: 99% Duty Cycle
• Adjustable Output Voltage Soft-Start or Tracking
• Power Good Output Voltage Monitors
• Output Overvoltage Protection
• Low Shutdown IQ: < 14µA
• Internal LDO Powers Gate Drive from VINor EXTVCC
• No Current Foldback During Start-Up
• Small Low Profile (0.75mm) 5mm × 5mm QFN Package
• AEC-Q100 Qualified for Automotive Applications

Description

AI
The LTC3890 is a high performance dual step-down switching regulator DC/DC controller that drives all N-channel synchronous power MOSFET stages. A constant frequency current mode architecture allows a phase-lockable frequency of up to 850kHz. Power loss and noise due to the ESR of the input capacitor are minimized by operating the two controller output stages out-of-phase.The 50μA no-load quiescent current extends operating run time in battery-powered systems. OPTI-LOOP®compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. The LTC3890 features a precision 0.8V reference and power good output indicators. A wide 4V to 60V input supply range encompasses a wide range of intermediate bus voltages and battery chemistries.Independent TRACK/SS pins for each controller ramp the output voltages during start-up. Current foldback limits MOSFET heat dissipation during short-circuit conditions. The PLLIN/MODE pin selects among Burst Mode operation, pulse-skipping mode, or continuous conduction mode at light loads. For a leaded package version (28-lead Narrow SSOP), see the LTC3890-1 data sheet.LTC3890LTC3890-1LTC3890-2LTC3890-3Adjustable Current LimitLimitYesNoYesNoCLKOUT/PHASMD forMultiphase OperationYesNoYesNoNumber of PGoodOutputs2121OVP – Bottom GateCrowbarYesYesNoNoCurrent Limit FoldbackYesYesNoNoLight Load Operationwhen Synced to ExternalClockForced ContinuousForced ContinuousPulse SkippingPulse SkippingSENSE Pins CommonMode RangeCommon Mode < 0.5VRequires VFB < 0.65VCommon Mode < 0.5VRequires VFB < 0.65VNot Dependant onVFB. Easy to make anon-synchronousBoost or SEPICNot Dependant onVFB. Easy to make anon-synchronousBoost or SEPICPackage5 × 5 QFN-32SSOP-285 × 5 QFN-32SSOP-28ApplicationsAutomotive Always-On SystemsBattery Operated Digital DevicesDistributed DC Power Systems