V62/16627 Series

16 MHz ULP microcontroller reaturing 128 KB FRAM, 2 KB SRAM, 48 IO, ADC12, Scan IF, AES

Catalog

16 MHz ULP microcontroller reaturing 128 KB FRAM, 2 KB SRAM, 48 IO, ADC12, Scan IF, AES

Part	Speed	Supplier Device Package	RAM Size	Oscillator Type	Operating Temperature [Min]	Operating Temperature [Max]	Core Processor	Connectivity	Program Memory Type	Program Memory Size	Peripherals	Mounting Type	Number of I/O	Data Converters	Package / Case	Core Size	Voltage - Supply (Vcc/Vdd) [Min]	Voltage - Supply (Vcc/Vdd) [Max]
Texas Instruments V62/16627-01XE	16 MHz	64-VQFN (9x9)	2K x 8	Internal	-55 C	95 °C	CPUXV2	I2C IrDA SPI UART/USART	FRAM	128 KB	Brown-out Detect/Reset DMA POR PWM WDT	Surface Mount	48	12x12b	64-VFQFN Exposed Pad	16-Bit	1.8 V	3.6 V

Catalog

16 MHz ULP microcontroller reaturing 128 KB FRAM, 2 KB SRAM, 48 IO, ADC12, Scan IF, AES

Key Features

• Embedded Microcontroller16-Bit RISC Architecture up to 16-MHz ClockWide Supply Voltage Range (1.8 V to 3.6 V)1.99-V Minimum Supply Voltage Required for Power Up per SVSHPower-Up LevelOptimized Ultra-Low-Power ModesActive Mode: Approximately 100 µA/MHzStandby (LPM3 With VLO): 0.4 µA (Typical)Real-Time Clock (RTC) (LPM3.5): 0.35 µA (Typical)(1)Shutdown (LPM4.5): 0.02 µA (Typical)Ultra-Low-Power Ferroelectric RAM (FRAM)Up to 128KB of Nonvolatile MemoryUltra-Low-Power WritesFast Write at 125 ns per Word (64KB in 4 ms)Unified Memory = Program + Data + Storage in One Single Space1015Write Cycle EnduranceRadiation Resistant and NonmagneticIntelligent Digital Peripherals32-Bit Hardware Multiplier (MPY)Three-Channel Internal Direct Memory Access (DMA)RTC With Calendar and Alarm FunctionsFive 16-Bit Timers With up to 7 Capture/Compare Registers Each16-Bit and 32-Bit Cyclic Redundancy Checker (CRC16, CRC32)High-Performance Analog16-Channel Analog Comparator12-Bit Analog-to-Digital Converter (ADC) With Internal Reference and Sample-and-Hold and up to 16 External Input ChannelsIntegrated LCD Driver With Contrast Control for up to 320 SegmentsMultifunction Input/Output PortsAll P1 to P10 and PJ Pins Support Capacitive Touch Capability Without Need for External ComponentsAccessible Bit-, Byte- and Word-Wise (in Pairs)Edge-Selectable Wakeup From LPM on Ports P1, P2, P3, and P4Programmable Pullup and Pulldown on All PortsCode SecurityTrue Random Number Seed for Random Number Generation AlgorithmEnhanced Serial CommunicationeUSCI_A0 and eUSCI_A1 Support:UART With Automatic Baud-Rate DetectionIrDA Encode and DecodeSPIeUSCI_B0 and eUSCI_B1 Support:I2C With Multiple-Slave AddressingSPIHardware UART and I2C Bootloader (BSL)Flexible Clock SystemFixed-Frequency DCO With 10 Selectable Factory-Trimmed FrequenciesLow-Power Low-Frequency Internal Clock Source (VLO)32-kHz Crystals (LFXT)High-Frequency Crystals (HFXT)Development Tools and SoftwareFree Professional Development Environments With EnergyTrace++™ TechnologyExperimenter and Development KitsControlled BaselineOne Assembly/Test Site, One Fabrication SiteEnhanced Diminishing Manufacturing Sources (DMS) SupportEnhanced Product-Change NotificationQualification Pedigree(1)RTC is clocked by a 3.7-pF crystal.Embedded Microcontroller16-Bit RISC Architecture up to 16-MHz ClockWide Supply Voltage Range (1.8 V to 3.6 V)1.99-V Minimum Supply Voltage Required for Power Up per SVSHPower-Up LevelOptimized Ultra-Low-Power ModesActive Mode: Approximately 100 µA/MHzStandby (LPM3 With VLO): 0.4 µA (Typical)Real-Time Clock (RTC) (LPM3.5): 0.35 µA (Typical)(1)Shutdown (LPM4.5): 0.02 µA (Typical)Ultra-Low-Power Ferroelectric RAM (FRAM)Up to 128KB of Nonvolatile MemoryUltra-Low-Power WritesFast Write at 125 ns per Word (64KB in 4 ms)Unified Memory = Program + Data + Storage in One Single Space1015Write Cycle EnduranceRadiation Resistant and NonmagneticIntelligent Digital Peripherals32-Bit Hardware Multiplier (MPY)Three-Channel Internal Direct Memory Access (DMA)RTC With Calendar and Alarm FunctionsFive 16-Bit Timers With up to 7 Capture/Compare Registers Each16-Bit and 32-Bit Cyclic Redundancy Checker (CRC16, CRC32)High-Performance Analog16-Channel Analog Comparator12-Bit Analog-to-Digital Converter (ADC) With Internal Reference and Sample-and-Hold and up to 16 External Input ChannelsIntegrated LCD Driver With Contrast Control for up to 320 SegmentsMultifunction Input/Output PortsAll P1 to P10 and PJ Pins Support Capacitive Touch Capability Without Need for External ComponentsAccessible Bit-, Byte- and Word-Wise (in Pairs)Edge-Selectable Wakeup From LPM on Ports P1, P2, P3, and P4Programmable Pullup and Pulldown on All PortsCode SecurityTrue Random Number Seed for Random Number Generation AlgorithmEnhanced Serial CommunicationeUSCI_A0 and eUSCI_A1 Support:UART With Automatic Baud-Rate DetectionIrDA Encode and DecodeSPIeUSCI_B0 and eUSCI_B1 Support:I2C With Multiple-Slave AddressingSPIHardware UART and I2C Bootloader (BSL)Flexible Clock SystemFixed-Frequency DCO With 10 Selectable Factory-Trimmed FrequenciesLow-Power Low-Frequency Internal Clock Source (VLO)32-kHz Crystals (LFXT)High-Frequency Crystals (HFXT)Development Tools and SoftwareFree Professional Development Environments With EnergyTrace++™ TechnologyExperimenter and Development KitsControlled BaselineOne Assembly/Test Site, One Fabrication SiteEnhanced Diminishing Manufacturing Sources (DMS) SupportEnhanced Product-Change NotificationQualification Pedigree(1)RTC is clocked by a 3.7-pF crystal.

Description

The MSP430™ ultra-low-power (ULP) FRAM platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, allowing innovators to increase performance at lowered energy budgets. FRAM technology combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash at much lower power. The MSP430 ULP FRAM portfolio consists of a diverse set of devices that feature FRAM, the ULP 16-bit MSP430 CPU, and intelligent peripherals targeted for various applications. The ULP architecture showcases seven low-power modes, which are optimized to achieve extended battery life in energy-challenged applications. As a high reliability enhanced product, with controlled baseline, extended temperature range (–55°C to 95°C) and gold bond wires in the package, this device is uniquely suited to mission critical applications. The MSP430™ ultra-low-power (ULP) FRAM platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, allowing innovators to increase performance at lowered energy budgets. FRAM technology combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash at much lower power. The MSP430 ULP FRAM portfolio consists of a diverse set of devices that feature FRAM, the ULP 16-bit MSP430 CPU, and intelligent peripherals targeted for various applications. The ULP architecture showcases seven low-power modes, which are optimized to achieve extended battery life in energy-challenged applications. As a high reliability enhanced product, with controlled baseline, extended temperature range (–55°C to 95°C) and gold bond wires in the package, this device is uniquely suited to mission critical applications.