LTC4053-4.2 Series

USB Compatible Lithium-Ion Battery Charger with Thermal Regulation

Catalog

USB Compatible Lithium-Ion Battery Charger with Thermal Regulation

Part	Battery Chemistry	Number of Cells	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	Interface	Fault Protection	Mounting Type	Current - Charging	Programmable Features	Voltage - Supply (Max) [Max]	Battery Pack Voltage	Package / Case	Package / Case
Analog Devices LTC4053EDD-4.2#PBF	Lithium Ion	1	10-DFN (3x3)	85 °C	-40 °C	USB	Over Temperature	Surface Mount	Constant - Programmable	Timer	6.5 V	4.2 V	10-WFDFN Exposed Pad
Analog Devices LTC4053EDD-4.2#TRPBF	Lithium Ion	1	10-DFN (3x3)	85 °C	-40 °C	USB	Over Temperature	Surface Mount	Constant - Programmable	Timer	6.5 V	4.2 V	10-WFDFN Exposed Pad
Analog Devices LTC4053EMSE-4.2#TRPBF	Lithium Ion	1	10-MSOP-EP	85 °C	-40 °C	USB	Over Temperature	Surface Mount	Constant - Programmable	Timer	6.5 V	4.2 V	10-MSOP 10-TFSOP Exposed Pad	0.118 in 3 Lead

Catalog

USB Compatible Lithium-Ion Battery Charger with Thermal Regulation

Key Features

• Charges Single-Cell Li-Ion Batteries Directly from USB Port

• Thermal Regulation Maximizes Charging Rate without Risk of Overheating*

• Programmable Charge Current with ±7% Accuracy

• Low Dropout Operation

• No External MOSFET, Sense Resistor or Blocking Diode Required

• Programmable Charge Termination Timer

• Preset Charge Voltage with ±1% Accuracy

• C/10 Charge Current Detection Output

• AC Present Logic Output

• 25µA Supply Current in Shutdown Mode

• Automatic Recharge

• Tiny Thermally Enhanced 10-Pin MSOP Package

• Charge Current Monitor Useful for Gas Gauging*

• Thermistor Input for Temperature Qualified Charging

Description

The LTC4053 is a standalone linear charger for lithium-ion batteries that can be powered directly from a USB port. The IC contains an on-chip power MOSFET and eliminates the need for an external sense resistor and blocking diode. Thermal regulation automatically adjusts charge current to limit die temperature during high power or high ambient temperature conditions. This feature protects the end product and the LTC4053 from thermal stress while the IC charges the battery at maximum rate without interruption.The charge current and charge time can be set externally with a single resistor and capacitor, respectively. When the input supply (wall adapter or USB supply) is removed, the LTC4053 automatically enters a low current sleep mode, dropping the battery drain current to less than 5µA.The LTC4053 also includes NTC temperature sensing, C/10 detection circuitry, AC present logic, low battery charge conditioning (trickle charging) and shutdown (25µA supply current).The LTC4053 is available in a 10-pin thermally enhanced MSOP package.ApplicationsCellular TelephonesHandheld ComputersCharging Docks and CradlesMP3 PlayersDigital Cameras