UC2843A-Q1 Series
30-V, 1-A, 500KHz current mode PWM controller with 8.4V/7.6V UVLO 100% duty cycle 40°C to 85°C
Manufacturer: Texas Instruments
Catalog
30-V, 1-A, 500KHz current mode PWM controller with 8.4V/7.6V UVLO 100% duty cycle 40°C to 85°C
Key Features
• Qualified for automotive applicationsExtended temperature performance of –40°C to 125°COptimized for off-line and DC-to-DC convertersLow start-up current (<0.5mA)Trimmed oscillator-discharge currentAutomatic feed-forward compensationPulse-by-pulse current limitingEnhanced load-response characteristicsUnder-voltage lockout with hysteresisDouble-pulse suppressionHigh-current totem-pole outputInternally trimmed bandgap reference500kHz operationLow RO Error AmpCreate a Custom Design Using the UC2843A-Q1 With theWEBENCH Power DesignerQualified for automotive applicationsExtended temperature performance of –40°C to 125°COptimized for off-line and DC-to-DC convertersLow start-up current (<0.5mA)Trimmed oscillator-discharge currentAutomatic feed-forward compensationPulse-by-pulse current limitingEnhanced load-response characteristicsUnder-voltage lockout with hysteresisDouble-pulse suppressionHigh-current totem-pole outputInternally trimmed bandgap reference500kHz operationLow RO Error AmpCreate a Custom Design Using the UC2843A-Q1 With theWEBENCH Power Designer
Description
AI
The UC2842A/3A/4A/5A family of control ICs is a pin for pin compatible improved version of the UC2842/3/4/5 family. Providing the necessary features to control current mode switched mode power supplies, this family has the following improved features. Start up current is designed to be less than 0.5mA. Oscillator discharge is trimmed to 8.3mA. During under voltage lockout, the output stage can sink at least 10mA at less than 1.2V for VCC over 5V.
The difference between members of this family are shown in the table below.
The UC2842A/3A/4A/5A family of control ICs is a pin for pin compatible improved version of the UC2842/3/4/5 family. Providing the necessary features to control current mode switched mode power supplies, this family has the following improved features. Start up current is designed to be less than 0.5mA. Oscillator discharge is trimmed to 8.3mA. During under voltage lockout, the output stage can sink at least 10mA at less than 1.2V for VCC over 5V.
The difference between members of this family are shown in the table below.