Zenode.ai Logo
Beta
K

LTC4126-ADJ Series

10mA Wireless Li-Ion Charger with 1.2V Step-Down DC/DC Converter

Manufacturer: Analog Devices

Catalog

10mA Wireless Li-Ion Charger with 1.2V Step-Down DC/DC Converter

Key Features

• Wireless Li-Ion Battery Charger Plus High Efficiency Multi-Mode Charge Pump DC/DC
• Programmable Charge Current from 1mA to 50mA Via an External Resistor
• Wideband Rx Frequency: DC to >10MHz
• Integrated Rectifier with Overvoltage Limit
• Charge Voltage: 4.2V
• Low Battery Disconnect: 3.0V
• NTC Pin for Temperature Qualified Charging
• DC/DC Regulated Output: 1.2V
• DC/DC Output Current: Up to 60mA
• 50kHz/75kHz Switching, No Audible Noise
• Pushbutton and/or Digital on/off Control for DC/DC
• Thermally Enhanced 12-Lead 2mm × 2mm LQFN Package

Description

AI
The LTC4126-10 is a low-power wireless single-cell Li-Ion battery charger with an integrated step-down DC/ DC regulator. The step-down regulator is a low-noise multimode charge pump which is powered from the battery and provides a regulated 1.2V at the output. The switching frequency is set to either 50kHz or 75kHz depending on the mode to keep any switching noise out of the audible range.The LTC4126-10 charger is a full-featured constant-current constant-voltage Li-Ion battery charger with automatic recharge, automatic termination by safety timer, and battery temperature monitoring via an NTC pin. Charge current is fixed at 10mA with a 3-hour termination timer. Undervoltage protection disconnects the battery from all loads when the battery voltage is below 3.0V.The tiny 2mm × 2mm LQFN package and minimal external component count make the LTC4126-10 well suited for Li-Ion battery powered hearing aid applications and other low power portable devices where a small solution size is required.ApplicationsHearing AidsLow Power Li-Ion Powered DevicesWireless HeadsetsIoT Wearables