LTC3717 Series
Wide Operating Range, No RSENSE™Step-Down Controller for DDR/QDR Memory Termination
Manufacturer: Analog Devices
Catalog
Wide Operating Range, No RSENSE™Step-Down Controller for DDR/QDR Memory Termination
Key Features
• VOUT= 1/2 VIN(Supply Splitter)
• Adjustable and Symmetrical Sink/Source Current Limit up to 20A
• ±0.65% Output Voltage Accuracy
• Up to 97% Efficiency
• No Sense Resistor Required
• Ultrafast Transient Response
• True Current Mode Control
• 2% to 90% Duty Cycle at 200kHz
• tON(MIN)≤ 100ns
• Stable with Ceramic COUT
• Dual N-Channel MOSFET Synchronous Drive
• Power Good Output Voltage Monitor
• Wide VCCRange: 4V to 36V
• Adjustable Switching Frequency up to 1.5MHz
• Output Overvoltage Protection
• Optional Short-Circuit Shutdown Timer
• Available in a 16-Pin Narrow SSOP Package
Description
AI
The LTC3717 is a synchronous step-down switching regulator controller for double data rate (DDR) and Quad Data Rate™(QDR™) memory termination. The controller uses a valley current control architecture to deliver very low duty cycles without requiring a sense resistor. Operating frequency is selected by an external resistor and is compensated for variations in VIN.Forced continuous operation reduces noise and RF interference. Output voltage is internally set to half of VREF, which is user programmable.Fault protection is provided by an output overvoltage comparator and optional short-circuit shutdown timer. Soft-start capability for supply sequencing is accomplished using an external timing capacitor. The regulator current limit level is symmetrical and user programmable. Wide supply range allows operation from 4V to 36V at the VCCinput.Von PinPackageLTC3717NoSSOP-16LTC3717-1YesQFN-32ApplicationsBus Termination: DDR and QDR Memory, SSTL, HSTL, ...Notebook Computers, Desktop ServersTracking Power Supply