LTC4410 Series

USB Power Manager in ThinSOT

Catalog

USB Power Manager in ThinSOT

Part	Package / Case	Fault Protection	Operating Temperature [Max]	Operating Temperature [Min]	Supplier Device Package	Battery Chemistry	Number of Cells	Voltage - Supply (Max)	Mounting Type	Interface
Analog Devices LTC4410ES6#TRMPBF	SOT-23-6 Thin TSOT-23-6	Over Temperature Reverse Current	85 °C	-40 °C	TSOT-23-6	Lithium Ion	1	5.5 V	Surface Mount	USB
Analog Devices LTC4410ES6#TRPBF	SOT-23-6 Thin TSOT-23-6	Over Temperature Reverse Current	85 °C	-40 °C	TSOT-23-6	Lithium Ion	1	5.5 V	Surface Mount	USB

Catalog

USB Power Manager in ThinSOT

Key Features

• Manages Total Power Between a USB Peripheral and Battery Charger

• Minimal Voltage Drop (100mV at 500mA)

• Ultralow Battery Drain: 1µA

• Reverse Current Blocking Diode not Required

• Undervoltage Lockout

• Very Few External Components

• Compatible with Several LTC Linear Battery Chargers

• Overtemperature Protected

• Dual Battery Charge Priority Management

• Low Profile (1mm) SOT-23 Package

Description

The LTC4410 enables simultaneous battery charging and operation of portable USB 1.0 and 2.0 compliant devices while they are connected to a USB port. As the USB peripheral load increases, the LTC4410 proportionally reduces the battery charge current to keep the total current less than 500mA or 100mA, depending on the state of the MODE pin.The LTC4410 includes a USB present output that drives an external P-channel MOSFET to disconnect the battery from the USB peripheral when the USB power is valid. This allows device operation when connected to the USB port, even when the battery is deeply discharged.Other features include reverse current blocking, thermal shutdown and low quiescent current (80µA in 500mA MODE) that is compliant with USB Suspend Mode.The LTC4410 is available in the low profile (1mm) SOT-23 (ThinSOT™) package.ApplicationsCellular PhonesPDAsDigital CamerasMP3 PlayersBattery Backup Systems