UCC27289 Series
2.5-A to 3.5-A, 120-V half bridge gate driver with 8-V UVLO and enable
Manufacturer: Texas Instruments
Catalog
2.5-A to 3.5-A, 120-V half bridge gate driver with 8-V UVLO and enable
| Part | Package / Case | Package / Case [y] | Package / Case [x] | Supplier Device Package | Fault Protection | Technology | Operating Temperature [Max] | Operating Temperature [Min] | Features | Load Type | Applications | Voltage - Load [Min] | Voltage - Load [Max] | Current - Peak Output | Voltage - Supply [Min] | Voltage - Supply [Max] | Interface | Mounting Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments | 8-SOIC | 3.9 mm | 0.154 in | 8-SOIC | Current Limiting Over Voltage Short Circuit UVLO | NMOS | 125 °C | -40 °C | Bootstrap Circuit | Capacitive Inductive Resistive | General Purpose | 8 V | 16 V | 3 A | 8 V | 16 V | Analog Logic PWM | Surface Mount |
Texas Instruments | 8-SOIC | 3.9 mm | 0.154 in | 8-SOIC | Current Limiting Over Voltage Short Circuit UVLO | Bipolar NMOS Power MOSFET | 125 °C | -40 °C | Capacitive and Resistive | General Purpose | 8 V | 16 V | 2.5 A | 8 V | 16 V | Analog Logic PWM | Surface Mount | |
Texas Instruments | 8-SOIC | 3.9 mm | 0.154 in | 8-SOIC | Current Limiting Over Voltage Short Circuit UVLO | NMOS PMOS Power MOSFET | 125 °C | -40 °C | Bootstrap Circuit | Capacitive Inductive Resistive | General Purpose | 8 V | 16 V | 2.5 A 3.5 A | 8 V | 16 V | Analog Logic PWM | Surface Mount |
Key Features
• Drives two N-channel MOSFETs in high-side low-side configurationEnable/disable functionality in DRC packageLow current (7-µA) consumption when disabled16-ns typical propagation delay12-ns rise, 10-ns fall time with 1800-pF load (typical)1-ns typical delay matchingIntegrated 100V bootstrap diode8-V typical undervoltage lockoutAbsolute maximum negative voltage handling on inputs (–5 V)Absolute maximum negative voltage handling on HS (–14 V)±3-A peak output currentAbsolute maximum boot voltage 120 VInputs are independent of each other and VDDUnder voltage lockout for both channelsSpecified from –40°C to 140°C junction temperatureDrives two N-channel MOSFETs in high-side low-side configurationEnable/disable functionality in DRC packageLow current (7-µA) consumption when disabled16-ns typical propagation delay12-ns rise, 10-ns fall time with 1800-pF load (typical)1-ns typical delay matchingIntegrated 100V bootstrap diode8-V typical undervoltage lockoutAbsolute maximum negative voltage handling on inputs (–5 V)Absolute maximum negative voltage handling on HS (–14 V)±3-A peak output currentAbsolute maximum boot voltage 120 VInputs are independent of each other and VDDUnder voltage lockout for both channelsSpecified from –40°C to 140°C junction temperature
Description
AI
The UCC27289 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3-A peak source and sink current along with low pull-up and pull-down resistance allows the UCC27289 to drive large power MOSFETs with minimum switching losses during the transition of the MOSFET Miller plateau. Since the inputs are independent of the supply voltage, UCC27289 can be used in conjunction with both analog and digital controllers. Two inputs are completely independent of each other and thus two outputs can be overlapped by overlapping inputs, if needed. The enable and disable functionality provides additional system flexibility by reducing power consumption by the driver and responds to fault events within the system.
The input pins as well as the HS pin are able to tolerate significant negative voltage, which improves system robustness. Small propagation delay and delay matching specifications minimize the dead-time requirement which improves system efficiency.
Under voltage lockout (UVLO) is provided for both the high-side and low-side driver stages forcing the outputs low if the VDD voltage is below the specified threshold. An integrated bootstrap diode eliminates the need for an external discrete diode in many applications, which saves board space and reduces system cost. UCC27289 is offered in multiple packages to accommodate system requirements such as robustness in harsh environments and density in compact applications.
The UCC27289 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3-A peak source and sink current along with low pull-up and pull-down resistance allows the UCC27289 to drive large power MOSFETs with minimum switching losses during the transition of the MOSFET Miller plateau. Since the inputs are independent of the supply voltage, UCC27289 can be used in conjunction with both analog and digital controllers. Two inputs are completely independent of each other and thus two outputs can be overlapped by overlapping inputs, if needed. The enable and disable functionality provides additional system flexibility by reducing power consumption by the driver and responds to fault events within the system.
The input pins as well as the HS pin are able to tolerate significant negative voltage, which improves system robustness. Small propagation delay and delay matching specifications minimize the dead-time requirement which improves system efficiency.
Under voltage lockout (UVLO) is provided for both the high-side and low-side driver stages forcing the outputs low if the VDD voltage is below the specified threshold. An integrated bootstrap diode eliminates the need for an external discrete diode in many applications, which saves board space and reduces system cost. UCC27289 is offered in multiple packages to accommodate system requirements such as robustness in harsh environments and density in compact applications.