LTC5593 Series

Dual 2.3GHz to 4.5GHz High Dynamic Range Downconverting Mixer

Catalog

Dual 2.3GHz to 4.5GHz High Dynamic Range Downconverting Mixer

Part	RF Type	Supplier Device Package	Mounting Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Number of Mixers	Package / Case	Frequency [Min]	Frequency [Max]	Secondary Attributes	Current - Supply	Gain	Noise Figure
Analog Devices LTC5593IUH#PBF	LTE WiMax	24-QFN (5x5)	Surface Mount	3.1 V	5.3 V	2	24-WQFN Exposed Pad	2.3 GHz	4.5 GHz	Down Converter	396 mA	7 dBi	12 dB

Catalog

Dual 2.3GHz to 4.5GHz High Dynamic Range Downconverting Mixer

Key Features

• Conversion Gain: 8.5dB at 2500MHz

• IIP3: 27.7dBm at 2500MHz

• Noise Figure: 9.5dB at 2500MHz

• 15.9dB NF Under 5dBm Blocking

• High Input P1dB

• 52dB Channel Isolation at 2500MHz

• 3.3V Supply, 1.3W Power Consumption

• Low Power Mode for 0.8W Consumption

• Independent Channel Shutdown Control

• 50Ω Single-Ended RF and LO Inputs

• LO Input Matched In All Modes

• 0dBm LO Drive Level

• –40°C to 105°C Operation

• Small QFN (5mm × 5mm) Package and Solution Size

Description

The LTC5593 is part of a family of dual-channel high dynamic range, high gain downconverting mixers covering the 600MHz to 4.5GHz RF frequency range. The LTC5593 is optimized for 2.3GHz to 4.5GHz RF applications. The LO frequency must fall within the 2.1GHz to 4.2GHz range for optimum performance. A typical application is a LTE or WiMAX multichannel or diversity receiver with a 2.3GHz to 2.7GHz RF input.The LTC5593’s high conversion gain and high dynamic range enable the use of lossy IF filters in high selectivity receiver designs, while minimizing the total solution cost, board space and system-level variation. A low current mode is provided for additional power savings and each of the mixer channels has independent shutdown control.ApplicationsWireless Infrastructure Diversity Receivers (LTE, WiMAX)Transmit DPD ReceiversMIMO Infrastructure ReceiversBroadband Microwave Receivers