23S09E Series

3.3V Zero Delay Clock Buffer, Spread Spectrum Compatible

Manufacturer: Renesas Electronics Corporation

Catalog

3.3V Zero Delay Clock Buffer, Spread Spectrum Compatible

Part	Number of Circuits	Voltage - Supply [Max]	Voltage - Supply [Min]	Supplier Device Package	Mounting Type	Output	PLL	Frequency - Max [Max]	Package / Case [x]	Package / Case	Package / Case [y]	Type	Ratio - Input:Output	Operating Temperature [Max]	Operating Temperature [Min]
Renesas Electronics Corporation 23S09E-1HPGG	1	3.6 V	3 V	16-TSSOP	Surface Mount	CMOS LVTTL	Yes with Bypass	200 MHz	0.173 in	16-TSSOP	4.4 mm	Zero Delay Buffer	1:9	70 °C	0 °C
Renesas Electronics Corporation 23S09E-1HPGGI	1	3.6 V	3 V	16-TSSOP	Surface Mount	CMOS LVTTL	Yes with Bypass	200 MHz	0.173 in	16-TSSOP	4.4 mm	Zero Delay Buffer	1:9	85 °C	-40 °C
Renesas Electronics Corporation 23S09-1DCGI	1	3.6 V	3 V	16-SOIC	Surface Mount	CMOS LVTTL	Yes with Bypass	133 MHz	0.154 in	16-SOIC	3.9 mm	Zero Delay Buffer	1:9	85 °C	-40 °C
Renesas Electronics Corporation 23S09-1HPGG	1	3.6 V	3 V	16-TSSOP	Surface Mount	CMOS LVTTL	Yes with Bypass	133 MHz	0.173 in	16-TSSOP	4.4 mm	Zero Delay Buffer	1:9	70 °C	0 °C
Renesas Electronics Corporation 23S09E-1HDCGI	1	3.6 V	3 V	16-SOIC	Surface Mount	CMOS LVTTL	Yes with Bypass	200 MHz	0.154 in	16-SOIC	3.9 mm	Zero Delay Buffer	1:9	85 °C	-40 °C
Renesas Electronics Corporation 23S09-1HDCG	1	3.6 V	3 V	16-SOIC	Surface Mount	CMOS LVTTL	Yes with Bypass	133 MHz	0.154 in	16-SOIC	3.9 mm	Zero Delay Buffer	1:9	70 °C	0 °C
Renesas Electronics Corporation 23S09T-1DCG	1	2.7 V	2.3 V	16-SOIC	Surface Mount	CMOS LVTTL	Yes with Bypass	133 MHz	0.154 in	16-SOIC	3.9 mm	Zero Delay Buffer	1:9	70 °C	0 °C
Renesas Electronics Corporation 23S09-1HDCGI8	1	3.6 V	3 V	16-SOIC	Surface Mount	CMOS LVTTL	Yes with Bypass	133 MHz	0.154 in	16-SOIC	3.9 mm	Zero Delay Buffer	1:9	85 °C	-40 °C

Description

The 23S09 is a high-speed phase-locked loop (PLL) clock buffer, designed to address high-speed clock distribution applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10MHz to 133MHz. The device is a 16-pin version of the 23S05. The 23S09 accepts one reference input and drives two banks of four low-skew clocks. The -1H version of this device operates up to 133MHz frequency and has higher drive than the -1 device. All parts have on-chip PLLs which lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad. In the absence of an input clock, the 23S09 enters power down. In this mode, the device will draw less than 12μA for the commercial temperature range and less than 25μA for the industrial temperature range, and the outputs are tri-stated. This device is characterized for both industrial and commercial operation.