5962-9211701 Series

High Speed, Low Power Dual Op Amp

Catalog

High Speed, Low Power Dual Op Amp

Part	Mounting Type	Voltage - Input Offset	Gain Bandwidth Product	Amplifier Type	Operating Temperature [Max]	Operating Temperature [Min]	Slew Rate	Number of Circuits	Current - Input Bias	Voltage - Supply Span (Max) [Max]	Supplier Device Package	Current - Output / Channel	Current - Supply	Package / Case	Package / Case	Package / Case	Package / Case [x]	Package / Case [y]
Analog Devices AD827JNZ	Through Hole	300 çV	50 MHz	General Purpose	70 °C	0 °C	300 V/µs	2	3.3 µA	36 V	8-PDIP	32 mA	10 mA	0.3 in	8-DIP	7.62 mm
Analog Devices AD827JN	Through Hole	300 çV	50 MHz	General Purpose	70 °C	0 °C	300 V/µs	2	3.3 µA	36 V	8-PDIP	32 mA	10 mA	0.3 in	8-DIP	7.62 mm
Analog Devices AD827JRZ-16-REEL7	Surface Mount	300 çV	50 MHz	General Purpose	70 °C	0 °C	300 V/µs	2	3.3 µA	36 V	16-SOIC	32 mA	10 mA		16-SOIC		0.295 in	7.5 mm
Analog Devices AD827JR-16	Surface Mount	300 çV	50 MHz	General Purpose	70 °C	0 °C	300 V/µs	2	3.3 µA	36 V	16-SOIC	32 mA	10 mA		16-SOIC		0.295 in	7.5 mm
Analog Devices 5962-9211701MPA	Through Hole	300 çV	50 MHz	General Purpose	125 °C	-55 °C	300 V/µs	2	3.3 µA	36 V	8-CERDIP	32 mA	10 mA	0.3 in	8-CDIP	7.62 mm
Analog Devices AD827SE/883B	Surface Mount	300 çV	50 MHz	General Purpose	125 °C	-55 °C	300 V/µs	2	3.3 µA	36 V	20-CLCC (9x9)	32 mA	10 mA		20-CLCC

Catalog

High Speed, Low Power Dual Op Amp

Key Features

• High Speed50 MHz Unity Gain Stable Operation300 V/ms Slew Rate120 ns Settling TimeDrives Unlimited Capacitive Loads

• 50 MHz Unity Gain Stable Operation

• 300 V/ms Slew Rate

• 120 ns Settling Time

• Drives Unlimited Capacitive Loads

• Excellent Video Performance0.04% Differential Gain @ 4.4 MHz0.198% Differential Phase @ 4.4 MHz

• 0.04% Differential Gain @ 4.4 MHz

• 0.198% Differential Phase @ 4.4 MHz

• Good DC Performance2 mV max Input Offset Voltage15 mV/°C Input Offset Voltage DriftAvailable in Tape and Reel in Accordance withEIA-481A Standard

• 2 mV max Input Offset Voltage

• 15 mV/°C Input Offset Voltage Drift

• Available in Tape and Reel in Accordance with

• EIA-481A Standard

• Low PowerOnly 10 mA Total Supply Current for Both Amplifiers5 V to 15 V Supplies

• Only 10 mA Total Supply Current for Both Amplifiers

• 5 V to 15 V Supplies

Description

The AD827 is a dual version of Analog Device's industry-standard AD847 op amp. Like the AD847, it provides high speed, low power performance at low cost. The AD827 achieves a 300 V/µs slew rate and 50 MHz unity-gain bandwidth while consuming only 100 mW when operating from ±5 volt power supplies. Performance is specified for operation using ±5 V to ±15 V power supplies.The AD827 offers an open-loop gain of 3,500 V/V into 500 Ohm loads. It also features a low input voltage noise of 15 nV/(root)Hz, and a low input offset voltage of 2 mV maximum. Common-mode rejection ratio is a minimum of 80 dB. Power supply rejection ratio is maintained at better than 20 dB with input frequencies as high as 1 MHz, thus minimizing noise feedthrough from switching power supplies.The AD827 is also ideal for use in demanding video applications, driving coaxial cables with less than 0.04% differential gain and 0.19° differential phase errors for 643 mV p-p into a 75 Ohm reverse terminated cable.The AD827 is also useful in multichannel, high speed data conversion systems where its fast (120 ns to 0.1%) settling time is of importance. In such applications, the AD827 serves as an input buffer for 8-bit to 10-bit A/D converters and as an output amplifier for high speed D/A converters.