LTC5590 Series

Dual 600MHz to 1.7GHz High Dynamic Range Downconverting Mixer

Catalog

Dual 600MHz to 1.7GHz High Dynamic Range Downconverting Mixer

Part	Package / Case	Noise Figure	Voltage - Supply [Min]	Voltage - Supply [Max]	Frequency [Min]	Frequency [Max]	Supplier Device Package	Number of Mixers	Mounting Type	RF Type	Gain	Current - Supply
Analog Devices LTC5590IUH#TRPBF	24-WQFN Exposed Pad	9.9 dB	3.1 V	5.3 V	600 MHz	1.7 GHz	24-QFN (5x5)	2	Surface Mount	GSM LTE W-CDMA	8.7 dBi	379 mA

Catalog

Dual 600MHz to 1.7GHz High Dynamic Range Downconverting Mixer

Key Features

• Conversion Gain: 8.7dB at 900MHz

• IIP3: 26dBm at 900MHz

• Noise Figure: 9.7dB at 900MHz

• 15.6dB NF Under 5dBm Blocking

• High Input P1dB

• 53dB Channel Isolation at 900MHz

• 1.3W Power Consumption at 3.3V

• Low Power Mode for <0.8W Consumption

• Enable Pins for Each Channel

• 50Ω Single-Ended RF and LO Inputs

• LO Input Matched In All Modes

• 0dBm LO Drive Level

• Small Package and Solution Size

• –40°C to 105°C Operation

Description

The LTC5590 is part of a family of dual-channel high dynamic range, high gain downconverting mixers covering the 600MHz to 4.5GHz RF frequency range. The LTC5590 is optimized for 600MHz to 1.7GHz RF applications. The LO frequency must fall within the 700MHz to 1.5GHz range for optimum performance. A typical application is a LTE or GSM receiver with a 700MHz to 915MHz RF input and high side LO.The LTC5590’s high conversion gain and high dynamic range enable the use of lossy IF filters in high selectivity receiver designs, while minimizing the total solution cost, board space and system-level variation. A low current mode is provided for additional power savings and each of the mixer channels has independent shutdown control.Applications3G/4G Wireless Infrastructure Diversity Receivers (LTE, CDMA, GSM)MIMO Infrastructure ReceiversHigh Dynamic Range Downmixer Applications