LTM4683 Series

Low VOUTQuad 31.25A or Single 125A μModule Regulator with Digital Power System Management

Catalog

Low VOUTQuad 31.25A or Single 125A μModule Regulator with Digital Power System Management

Part	Current - Output (Max) [Max]	Applications	Package / Case	Features	Number of Outputs	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Input (Max) [Max]	Voltage - Output 1 [Max]	Voltage - Output 1 [Min]	Mounting Type	Type	Supplier Device Package	Voltage - Input (Min) [Min]
Analog Devices LTM4683IY#PBF	125 A	ITE (Commercial)	330-BBGA Module	Adjustable Output I2C Interface Load Sharing Remote Sense	1	125 °C	-40 °C	14 V	0.7 V	0.3 V	Surface Mount	Non-Isolated PoL Module	330-BGA (22x15)	4.5 V

Catalog

Low VOUTQuad 31.25A or Single 125A μModule Regulator with Digital Power System Management

Key Features

• Quad Digitally Adjustable Analog Loops with Digital Interface for Control and Monitoring

• Wide Input Voltage Range: 4.5V to 14V

• Output Voltage Range: 0.3V to 0.7V

• ±0.5% DC Output Accuracy at 0.7V

• ±4.5% Current Readback Accuracy: 0°C to 125°C

• Optimized for Low Output Voltage Ranges

• 400kHz PMBus-Compliant I2C Serial Interface

• Supports Telemetry Polling Rates Up to 125Hz

• Integrated 16-Bit ΔΣ ADC

• Parallel and Current Share Multiple Modules

• 15mm × 22mm × 5.71mm BGA Package

• Input and Output Voltages, Currents, and Temperatures

• Running Peak Values, Uptime, Faults, and Warnings

• Onboard EEPROM Fault Log Record

• Output Voltage, Voltage Sequencing, and Margining

• Digital Soft-Start/Soft-Stop Ramp, Program Analog Loop

• OV/UV/OT, UVLO, Frequency and Phasing

Description

The LTM4683 is a quad 31.25A or single 125A stepdown μModule®(power micromodule) DC/DC regulator featuring remote configurability and telemetry monitoring of power management parameters over PMBus. The LTM4683 is comprised of digitally programmable analog control loops, and is optimized for higher bandwidth and transient response.The LTM4683's 2-wire serial interface allows outputs to be margined, tuned, and ramped up and down at programmable slew rates with sequencing delay times. True input current sense, output currents and voltages, output power, temperatures, uptime and peak values are readable. Custom configuration of the EEPROM contents is not required. At start-up, output voltages, switching frequency, and channel phase angle assignments can be set by pin-strapping resistors. The LTpowerPlay®graphical user interface (GUI), DC1613A USB-to-PMBus converter, and evaluation kits are available.The LTM4683 is offered in a 15mm × 22mm × 5.71mm BGA package available with a RoHS-compliant terminal finish.APPLICATIONSMulti-Rail Processor Power, Configurable Core Power