OP727 Series

Precision Rail-to-Rail Output Single Supply Dual Op Amp

Catalog

Precision Rail-to-Rail Output Single Supply Dual Op Amp

Part	Gain Bandwidth Product	Voltage - Supply Span (Min) [Min]	Mounting Type	Voltage - Input Offset	Package / Case	Package / Case [y]	Package / Case [x]	Current - Input Bias	Slew Rate	Current - Supply	Output Type	Operating Temperature [Max]	Operating Temperature [Min]	Amplifier Type	Current - Output / Channel	Number of Circuits	Voltage - Supply Span (Max) [Max]	Supplier Device Package
Analog Devices OP727ARZ	700 kHz	2.7 V	Surface Mount	30 çV	8-SOIC	3.9 mm	0.154 in	5 nA	0.2 V/µs	235 µA	Rail-to-Rail	85 °C	-40 °C	General Purpose	30 mA	2	30 V	8-SOIC

Catalog

Precision Rail-to-Rail Output Single Supply Dual Op Amp

Key Features

• Low Offset Voltage: 100 µV Max

• Low Input Bias Current: 10 nA Max

• Single-Supply Operation: 3.0 V to 30 V

• Dual-Supply Operation: ±1.5 V to ±15 V

• Low Supply Current: 300 µA/Amp Max

• Unity Gain Stable

• No Phase Reversal

Description

The OP727 is a precision dual rail-to-rail output single supply amplifier featuring micropower operation and rail to rail output ranges. The OP777, OP727 and OP747 amplifiers provide improved performance over the industry standard OP07 with ±15V supplies and offer the further advantages of true single supply operation down to +3.0V and smaller package options than any other high voltage precision bipolar amplifier. Outputs are stable with capacitive loads of over 1000pF. Supply current is less than 300 μA per amplifier at 5 V. 500 Ω series resistors protect the inputs, allowing input signal levels several volts above the positive supply without phase reversal.