AP3586A Series

Inactive Datasheet Archive

Catalog

Inactive Datasheet Archive

Part	Mounting Type	Duty Cycle (Max) [Max]	Output Phases	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	Number of Outputs	Function	Control Features	Output Type	Voltage - Supply (Vcc/Vdd) [Max]	Voltage - Supply (Vcc/Vdd) [Min]	Topology	Frequency - Switching	Package / Case	Package / Case	Package / Case	Output Configuration	Package / Case [y]	Package / Case [x]
Diodes Inc AP3586BMPTR-G1	Surface Mount	82 %	1	8-SO-EP	85 °C	-40 °C	1	Step-Down	Enable Phase Control	Transistor Driver	12 V	5 V	Buck	300 kHz	0.154 in	8-SOIC	3.9 mm	Positive
Diodes Inc AP3586AMPTR-G1	Surface Mount	82 %	1	8-SO-EP	85 °C	-40 °C	1	Step-Down	Enable Phase Control	Transistor Driver	12 V	5 V	Buck	300 kHz	0.154 in	8-SOIC	3.9 mm	Positive
Diodes Inc AP3586BMTR-G1	Surface Mount	82 %	1	8-SOIC	85 °C	-40 °C	1	Step-Down	Enable Phase Control	Transistor Driver	12 V	5 V	Buck	300 kHz		8-SOIC		Positive	3.9 mm	0.154 in

Catalog

Inactive Datasheet Archive

Key Features

• Supply Voltage: 5V/12V

• VIN Input Range: 3.3V to 12V

• 0.6V/0.8V to 82% of VIN Output Range

• Internal Reference: 0.6V/0.8V

• Simple Single-loop Control

• Voltage-mode PWM Control

• Duty Cycle: 0% to 82%

• Fast Transient Response

• 10MHz High-bandwidth Error Amplifier with 6V/μs Slew Rate

• Fixed Oscillator Frequency: 300kHz/200kHz

• Lossless, Programmable Over Current Protection (Uses Lower MOSFET RDS(ON) )

• Start-up into Pre-biased Load

• Built-in Thermal Shutdown

• Built-in Soft-start

• Over Current Protection

• Over Voltage Protection

• Under Voltage Protection

• Integrated Boot Diode

Description

The AP3586A/B/C is a compact synchronous -rectified buck controller specifically designed to operate from 5V or 12V supply voltage and deliver high-quality output voltage as low as 0.6V (AP3586A) or 0.8V (AP3586B/C). This device operates at fixed 300kHz (AP3586A/B) or 200kHz (AP3586C) frequency and provides an optimal level of integration to reduce size and cost of the power supply. This controller integrates internal MOSFET drivers that support 12V+12V bootstrapped voltage for highefficiency power conversion. The bootstrap diode is built-in to simplify the circuit design and minimize external part count. This controller provides single feedback loop, voltage-mode control with fast transient response. The error amplifier features a 10MHz gain-bandwidth product and 6V/μs slew rate which enables high converter bandwidth for fast transient performance. Other features include internal soft-start, under voltage protection, over current protection and shutdown function. With afore-mentioned functions, this part provides customers a compact, high efficiency, well-protected and cost-effective solutions. The AP3586A/B/C is available in SOIC-8 and PSOP-8 packages.