BD1HC500FVM-C Series

Automotive IPS series 1ch High-side switch

Catalog

Automotive IPS series 1ch High-side switch

Part	Grade	Output Configuration	Package / Case	Rds On (Typ)	Ratio - Input:Output [custom]	Output Type	Fault Protection	Mounting Type	Switch Type	Number of Outputs	Operating Temperature [Max]	Operating Temperature [Min]	Supplier Device Package	Current - Output (Max) [Max]	Input Type	Qualification	Package / Case	Package / Case
Rohm Semiconductor BD1HC500FVM-CTR	Automotive	High Side	8-MSOP 8-VSSOP	500 mOhm	1:1	P-Channel	Over Current Over Temperature UVLO	Surface Mount	General Purpose	1	150 °C	-40 °C	8-MSOP	2 A	CMOS	AEC-Q100
Rohm Semiconductor BD1HC500HFN-CTR	Automotive	High Side	8-PowerUDFN	500 mOhm	1:1	P-Channel	Over Current Over Temperature UVLO	Surface Mount	General Purpose	1	150 °C	-40 °C	8-HSON	2 A	CMOS	AEC-Q100
Rohm Semiconductor BD1HC500EFJ-CE2	Automotive	High Side	8-SOIC	500 mOhm	1:1	P-Channel	Over Current Over Temperature UVLO	Surface Mount	General Purpose	1	150 °C	-40 °C	8-HTSOP-J	2 A	CMOS	AEC-Q100	0.154 in	3.9 mm

Catalog

Automotive IPS series 1ch High-side switch

Key Features

• Built-in overcurrent protection circuit, Built-in Thermal Shut Down (TSD), Built-in Open Load Detection circuit (When Output is OFF), Possibility to control directly from CMOS logic IC, Low standby current, Built-in Under Voltage Lock Out circuit, Built-in diagnostic (ST) output function, Low On resistance of RDS (ON)=500mΩ (Typ) (VDD=12V, Ta=25°C, IOUT=0.25A), Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip, 1ch High-side switch for the mechanical relay coil drive, AEC-Q100 qualified(Grade 1)

Description

BD1HC500EFJ-C is an Automotive 1ch High-Side switch. It has a built-in overcurrent protection circuit, Thermal Shut Down (TSD) circuit, Open Load Detection circuit, Under Voltage Lock Out circuit, and has diagnostic (ST) output function at the time during abnormal detection.We recommendBD1HCU50EFJ-Cfor your new development. It uses different production lines for the purpose of improving production efficiency. Electric characteristics noted in Datasheet does not differ between Production Line.